TIP: Finding the Grain in Paper

I’m working on a super fun tutorial for tomorrow, and I thought I would take a minute to share a tip about finding the grain in paper.

What is paper grain?

Very simply- Most paper is made up of long fibers that align parallel to each other, which means that the paper will be more flexible in one direction (with the grain) than the other (against the grain.)

Why is grain important?

If you work with paper at all, you will find yourself working or fighting with the grain of paper. Because the paper will naturally want to flex with the grain, it will behave very differently depending on the way it is cut. This is especially true when you are working with thicker paper or cardstock.


What direction is the grain of this paper?

I always test the grain of a paper before I start planning a project or working with it. Some people will tell you that the grain typically runs parallel to the long side of a piece of paper, but I’ve found several instances where paper is cut the other way.
To find the grain of the paper:
• Take the paper in your hands and gently flex it one direction, then rotate it 90 degrees and flex it again. Depending on the thickness of the paper, you may want to flex it until it’s almost folded.
• It should flex more easily one way. That way is called “with the grain”.
• Sometimes I will make a light pencil mark along the flex, to show me which direction the grain is running.


What’s the best way to work with grain?

Here are a few activities that you might do with paper, and how the grain should be aligned.
• Book Binding – Book covers and guts should have the grain running parallel to the spine. If the grain goes the wrong way, pages will be difficult to flip, and the cover may warp.
• Folded Cards – You should always fold with the grain, meaning that your fold will be parallel to the fibers of the paper. That way your fold will happen in between the strings of fibers, rather than breaking them.
• Quilling or curling – If you are cutting your own quilling paper, it’s a good idea to cut against the grain, which means you’ll cut the fibers of the paper shorter. The paper will curve more fluidly this way, and you’re less likely to get ugly creases in your curls.
• Resistance projects – conversely, if you want to play with the stiffness of the paper rather than curling it up, you should cut with the grain so you have long strong fibers. (This is the kind of paper I was working with for my paper bird project.)
• Gluing – if you are duplexing, mounting, or otherwise gluing two pieces of paper or paperboard, you want to make sure the grain direction is the same for each piece. When paper is introduced to moisture from glue or even from the air, it will start to curl one direction. You want the grain direction to be the same on both pieces so that they don’t pull on each other.
• Tearing – Paper is always easier to tear along the grain (because you are pulling strings of fibers away from their neighbors instead of tearing them in half.)

What happens if you ignore the grain?

Terrible things! Books that don’t flip! Warped duplexed paper! Rough folds on your cards! Bends and creases where you don’t want them!

Know the grain. Respect the grain. Keep making stuff.

How do you play with paper? Does the grain effect you?


  1. says

    I don’t do very much with papercrafting probably because I am not very proficient. This is a great tutorial and reminder about how important the grain is. I did a bookbinding class and the tutor recommended we lick the paper to see what way it curled . I can remember that much but not what the result told us….!