DIY: Recycled Rainbow Mobile

1608_diychallenge_logo_wide

This month’s DIY Challenge theme is Rainbows, so send in all your favorite rainbow projects for the round-up at the end of the month. Visit the challenge page for more information, and use the handy-dandy form to upload your project photos. We can’t wait to see what you’ve made!

IMG_6311_rainbowmobile

Rainbows are amazing. They’re awe inspiring in the sky, they are a great way to organize things*, and they are just plain magical.

This little recycled rainbow mobile tries to be a few of those things- and has the added bonus of being a nifty reason to doodle.

IMG_6152_rainbowmobile

SUPPLIES

IMG_6164_rainbowmobile

Use the thick material punch to cut circles out of every piece of plastic you can find. Don’t worry, the idea of using recycleables for art will make you look insane. Embrace it. (;

IMG_6179_rainbowmobile

Use your rainbow of markers to doodle decorations on each circle. It’s okay if you have an uneven amount of some color because you think orange is terrible, just have fun!

IMG_6185_rainbowmobile

Tie three strings to your top ring, and tie those three together to hang the ring parallel to the ground. Find a place to hang this ring while you work.

IMG_6425_rainbowmobile

Choose one of your most popular colors (purple for me), and poke a small hole near the top of each piece with a safety pin. Cut a piece of thread approximately 12″ long, and string it through one of the holes. Tie the ends of the thread together, and attach it to the hanging ring using a lark’s head knot. Repeat this for each circle of this color.

IMG_6197_rainbowmobile

Choose the next color in the rainbow (blue in my case) and poke each piece like you did before. This time add two inches to your thread for a length of 14″. Attach each of these pieces to your ring.

IMG_6202_rainbowmobile

Continue by adding 2 inches to the length of each new color until you have tied all of your pieces to the ring.

IMG_6213_rainbowmobile

When you have finished, hang it in a bright window and watch it sway and catch the light.

IMG_6227_rainbowmobile

IMG_6317_rainbowmobile

See, sometimes trash-art is fun!

 

*I may or may not be one of those people who sorts books by color. My librarian mother may be driven insane by this fact.

DIY: Paper Maché Birdy Penny Bank

IMG_4952_birdybank
My friend Tara is a paper maché inspiration. A couple of years ago she made a couple of piggy banks that were so amazing I decided I needed to make a bank of my very own. A birdy bank.

I love that papier maché gives you the opportunity to make basically anything out of recycled materials. This is a great project for kids and adults alike- just be ready to take it in shifts over a couple of days so that the form has time to dry between each coat.
IMG_4669_birdybank

Basic Supplies and Tools

  • A table cloth or paper cover and an apron. This is a wonderfully messy project!
  • A balloon
  • Newspaper
  • Flour and water (to make paste)
  • A piece of chipboard (like scrap from a cracker box)
  • This template for the feet, beak, wings and tailfeathers (which you will cut from chipboard.)
  • Masking Tape
  • Glue – Hot glue works great, but other thick glues work in a pinch
  • Scissors and craft knife

Finishing Supplies

  • Sand paper or sanding block
  • Acrylic paint
  • ‘ glue or similar
  • Brush

 

Step One: Starting the Paper Maché and Form

IMG_4676_birdybank
Blow up one balloon about 5.5″ in diameter, and crumple up a piece of paper to make a head about 2.5″ in diameter. Tape the “head” to the balloon*, roughly the opposite side from the tied end.  (If you would prefer the inside of the birdy to be smooth, cover the balloon with a layer of paper maché before attaching the head.)

IMG_4685_birdybank
To make your simple paper maché paste, mix one part flour with one part water. (You can change this ratio if you prefer a more watery or thicker paste. Practice makes perfect.) Stir the paste with your finger until it is smooth.

IMG_4686_birdybank
Tear your newspaper into small strips and pieces and begin to coat your body form with a layer of newspaper. Dip each strip into the paste, and pull it through your fingers to remove excess paste and moisture.

IMG_4690_birdybank
Overlap the pieces of newspaper on your form, and cover all but the tied end. It may be helpful to set the balloon on a cup or bowl to lift it off of your surface.

IMG_4700_birdybank
When you have completely covered the form with one layer of newspaper, set it aside to dry. If you have a fan or space heater, set this little guy in front of that and it will dry faster. Make sure to let it dry almost completely before moving to the next layer of material, or you will have a soppy mess. At least wait a few hours.

Step Two: Adding more Detail

IMG_4708_birdybank
Since your bird looks nothing like a bird yet, it’s time to add some appendages. Download and print this template and cut each of the pieces from a piece of chipboard.

IMG_4711_birdybank
To build the birdy legs, cut into one side of the chipboard as shown, and roll the other end into a cylinder. Secure the roll with a couple of pieces of tape.

IMG_4714_birdybank

IMG_4717_birdybank
Then tape across the foot to attach it to the leg. The flap left at the end of the leg will be glued to the base of your balloon form.

IMG_4726_birdybank
Roll the beak to form a cone shape, and tape it in shape. Stuff a little piece of paper into the open end of the cone to make it easier to attach to your birdy head.

IMG_4732_birdybank
Glue works best to secure the wings, legs, beak, and tail feathers to your form. Hold them in place until the glue is holding firmly. When everything is in place, begin to add another layer of papier maché,  covering all the new parts of your bird in addition to adding another layer to the main form you’ve already covered.

IMG_4736_birdybank
As you add paper, make sure to leave the end of the balloon visible; this is where you’ll be breaking the balloon and pulling it out. Paper maché is very forgiving and it’s easy to cover up this hole.

IMG_4742_birdybank
When you’ve covered the form with one or two layers of paper, let it dry again. You may find that you have to stop before you’ve completed covering the whole thing because life gets in the way of your messy fun, or your messy fun become a little too messy. No worries! Just make sure that your paper is as smooth as you can make it, and let the bird rest.

Step Three: Removing the Balloon and Making this Guy a Bank

IMG_4743_birdybank
Yes. It looks silly. That’s okay, the best things are silly. When your form is completely dry, you’re ready to remove your balloon. Gently grip the balloon’s knot, and pierce the balloon to let the air out. As it shrinks, it should pull away from your paper. If it sticks in a spot, gently pull it out of the hole.

IMG_4754_birdybank
No bank is complete without a place to put the money. Mark a line down the back of your bird, between the wings, about 1/4″ wide and 1.5″ long. Use a craft knife to carefully trim out the piece you’ve marked.

To finish the bottom of the bank, you have a couple of options. You can either add an access hole for money to be removed or go with the ol’ piñata method– keep the money inside until it’s time to smash! (Which is definitely satisfying.)

IMG_4747_birdybank
If you’d like to make your bank reusable, find a small lid or something else that would work as a plug. Trace around the shape and cut any extra paper. It you’re having trouble keeping the cover in, trace it onto a scrap of chipboard and make a ring the perfect size, then glue that on top of your form and cover it with paper. The chipboard with provide a little extra stability. (Yes, I know this all looks kinda amusing. Giggles are allowed.)

Step Four: The last of the Papier Maché

IMG_4760_birdybank
If your form is feeling pretty secure, it’s time to start adding the last layer of papier maché. The paint will not completely cover the paper (unless you want it to) so this is a great time to start having fun with your paper color and prints. Save gold and orange colored paper for the beak, cover the wings and head in dark colors, and use white newsprint for the breast. When you’re happy with the way it looks, let it all dry overnight!

Step Five: Sanding and Painting

IMG_4763_birdybank
If you’re anything like me, your form will need a little sanding. USe sand paper or a sanding block to smooth off any edges of paper, clumps of paste, or rough edges- making sure not to sand below your papier mache layers.

IMG_4765_birdybank
To make a transparent paint layer, mix equal parts glue and white acrylic paint with a little water.  (Add more glue for more transparency, or more paint to cover the paper more opaquely.)

IMG_4772_birdybank
Gently apply a layer of paint and glue to the whole form and let it dry.

IMG_4790_birdybank
When it dries you will still be able to see a lot of your newspaper pattern. If you like, add another layer of white paint, or start to add more colors to bring out details. To keep some of the transparency, you can water down your colored paints and streak them across your form.

IMG_4955_birdybank
Let it all dry, and get ready to fill it with money!

IMG_4976_birdybank
Using this balloon method you can make pretty much any animal you want! I’d love to see!

DIY: Playing Card Ornaments

IMG_3564_playingcardornaments
An old deck of cards in one hand, and the perfect Christmas Tree outside… something weird’s gonna happen.

We love games at this house. Card games, board games… you name it. I don’t love worn-out cards, though, so I’ve been looking for a clever way of getting rid of a couple of our older decks. After playing with strips of paper as Christmas ornaments, I started thinking about ways to turn flat cards into 3-d shapes. Internet searches gave me a few options, including this great tutorial for making ornaments out of MTG playing cards. After following the tutorial, I made a couple of tweaks and ended up with another great collection of ornaments for our outdoor holiday tree.

IMG_3459_playingcardornaments

Supplies

  • A deck of cards
  • Thin-ish wire: I used 22 Gauge floral wire
  • Assorted beads or buttons: Make sure the wire will fit through the holes.
  • Wire clippers and pliers
  • Craft knife or paper cutter
  • Awl or large needle for piercing cards
  • Ribbon or string

IMG_3465_playingcardornaments
To begin you will cut several playing cards into 1/2″ strips. Choose 16 of those pieces to turn into your first ornament.

IMG_3471_playingcardornaments
Poke a hole, at the bottom and top of each piece, approximately 1/4″ from the end. (You should be able to pierce through multiple cards at once.)

IMG_3543_playingcardornaments
Trim a length of wire, approximately 10″ long, and put a small loop in one end. String at least one bead as a stopper, then start feeding your card pieces on, one at a time. This will be the bottom of your ornament, and the side showing from the bottom (shown above) will be the side of the card facing out on your ornament.

IMG_3527_playingcardornaments

The red side will be hidden on the inside of this ornament.


Once you have all your card pieces fed on the wire, add about 1-1/2″ of beads as spacers.

IMG_3544_playingcardornaments
Starting with the bottom piece of card, gently feed the wire through the pierced hole at the other end.

IMG_3545_playingcardornaments
Do the same with the next lowest piece of card, letting it rest against one side. Repeat with the next lowest piece of card EXCEPT let it rest on the other side of the center.

IMG_3547_playingcardornaments
Repeat this action on each piece, going back and forth between each side of the ornament. It should begin to form a sphere.

IMG_3538_playingcardornaments
There should be just enough space to feed the last (most interior) piece through. If you feel like the pieces are too cramped, you may want to gently tear a piece or two off your wire.

IMG_3550_playingcardornaments
When you have all the pieces wrapped back around, add another bead or two, make a loop in the wire, and trim. Feed a ribbon through the loop, and you have a nifty ornament!

IMG_3606_playingcardornaments

IMG_3569_playingcardornaments

Other things to try

  • Make the spacer inside the ornament longer for a more spherical ornament, or make it shorter for a more compressed “space saucer” ornament. The different shapes will need a slightly different number of card pieces, but I’ve found that they all use between 14 and 16 pieces.
  • String two ornaments on the same wire for a more complex shape.
  • Mix and match back pieces and front pieces for a striped pattern.
  • String an extra piece of beaded wire or string to the bottom of the ornament for even more decoration.
  • Go crazy with bead spacers and see what happens.

IMG_3576_playingcardornaments
What do you think? Trash to treasure?

DIY: Scrap Paper Strip Ornaments

IMG_3203_paperstripornament
Up until the last couple of years, Safety Husband and I would go home to Texas for the holidays, and we never felt the need to decorate for the season. For the last couple of years we’ve talked about decorating the “Christmas Tree” that just happens to be growing in our upper yard, and this year we’re making it happen. I’ve been putting my brain power into making ornaments that are either weatherproof, or are meant to be thrown away in January. It’s been a great chance to work through some of the materials I’ve been… ahem… collecting.

I love vintage ornaments and paper, and after a couple of years of experimentation I was ready to combine those two loves in this one ornament design. Super quick, because they are held together by staples, a couple of basic techniques can build a whole tree’s worth of decoration.

IMG_2828_paperstripornament

Supplies

  • Stapler
  • Ribbon (3/8″ to 1/2″ wide is great)
  • Scrap Paper: I used leftover 12×12 scrapbooking paper, but catalog or magazine pages would work well too! If you’re using thin paper, you might want to double up on the number of strips per ornament.
  • Clips: binder clips work great for this, but a clothespin will work in a pinch. (Pun intended.)
  • Scissors

IMG_2867_paperstripornament
To begin, cut about eight 1/2″ strips off your paper. (You can vary the number, just make sure you have an even number of strips.)

IMG_2871_paperstripornament
Cut a length of ribbon about twice the length of your paper strips.

IMG_2900_paperstripornament
Fold the ribbon in half, and stack half the strips on each side. Staple near the bottom of the stack, away from the loop of ribbon.

IMG_2904_paperstripornament
The staple will go through all the paper and the ribbon, securing that point. (Staples must be cheating, because they make this too easy.)

IMG_2921_paperstripornament
Put a clip about halfway down the paper, clamping the whole stack of paper and ribbon. With one hand, hold the clip, and with the other gently pull on the loop of the ribbon.

IMG_2923_paperstripornament
This should cause the paper to pooch out a little on the other side of the clip. Repeat the holding and pulling step, but this time grab the ribbon loop and the two strips of paper closest to it on either side.

IMG_2926_paperstripornament
Repeat again and again, adding another strip on either side, until you reach the outer strip.

IMG_2927_paperstripornament

IMG_2931_paperstripornament
Then carefully put a staple through the area the clip was holding.

IMG_2934_paperstripornament

IMG_2936_paperstripornament
Trim any excess paper with a pair of scissors.

IMG_2950_paperstripornament
If you want, you can curl some of the extra paper to add a little decorative detail. Simply roll the paper around a small pencil or paintbrush to curl it.

IMG_2959_paperstripornament
Once you get the hang of the whole pull method, you can shake things up by doing a similar technique, upside-down.

IMG_2977_paperstripornament
Staple in the middle of your ornament, and turn each strip back down. Once you’ve turned each strip, staple them at the bottom to form a heart shape.

IMG_3014_paperstripornament
Using these two techniques you can make a whole range of funky vintage ornaments.

IMG_3448_paperstripornament
If you get sick of looking at the staples, you can replace them with a couple of stitches. Simply poke a hole in the middle of the stack, and make stitches back and forth to secure the ornament.

IMG_3457_paperstripornament
Remove the staple, and you’ll never know it was there.

IMG_3130_paperstripornament
Or spend that time making a whole army or ornaments. It’s up to you!

IMG_3271_paperstripornament
One set down, more to go.

DIY: Simple Trees for Your Chipboard Forest

IMG_3721_chipboardtrees
Even before I was done building little chipboard houses I knew they would need a little setting to live in. I wanted to come up with a simple and flexible tree template that I could make a whole forest out of. Inspired by my old paper bird project, I used strips of chipboard to build these trees.

IMG_3354_chipboardtrees

Supplies

  • Scrap chipboard: from the backs of notepads or boxes. My pieces were 8.5×11″
  • You favorite paper glue
  • Clothespins or clips
  • Craft knife
  • Scoring Tool: a bone folder or dull knife work great

IMG_3356_chipboardtrees
I began by making two score lines along the long side of the board, at .5″ and at 2.5″.

IMG_3374_chipboardtrees
Then I cut two pieces, 1″ wide, off the other side for the trunk of my tree. The remaining piece of chipboard had my score marks on it, and I trimmed it into 1″ pieces (each piece has the same score marks).

I applied glue to the trunk pieces, and clipped them together to dry.

IMG_3380_chipboardtrees
While the trunk glue was drying, I folded each of my small pieces along the score marks, forming an L.

IMG_3387_chipboardtrees
Piece by piece, I applied glue to the .5″ flap and the top of the L…

IMG_3392_chipboardtrees
then clipped them to the trunk. In this picture you can see that I folded the two pieces of the trunk away from each other at the base; this will allow the trees to sit by themselves.

IMG_3400_chipboardtrees
I continued to add tree pieces until I liked what I saw (typically between 2 and 4 tiers), holding each piece with a couple of clips.

IMG_3405_chipboardtrees
When I was happy, let the glue sit overnight, held by the clips. (Happy little trees, as the man said.)

IMG_3707_chipboardtrees
On some I trimmed the top a bit, some I left tall. I love the way the variety turned out. These would be great with snowy glitter added, or paint. I’m just happy to have a forest for my little chipboard houses.

IMG_3701_chipboardtrees
Trees for the little paper world.

 

Yes, I know I sound crazy. Now go make something!

(;

DIY: Chipboard Village with Free House Template

IMG_3735_chipboardvillage
You might have noticed things have slowed down a little over here at A-I-M. Life goes in cycles, as we know, and unfortunately it’s been tripping us up lately. I’m still making things (some of them more therapeutic than others- like the DIY below), but the timing is tricky, and sometimes things don’t make it online as quickly as they should. We’d like to ask you to be patient with us, and give us time to refresh and collect ourselves. We’ll be back to full speed before you know it.

I’ve been trying to simplify my life because I have accumulated too many “things”; and I’ve made a resolution to truly embrace the making of things, rather than the buying or the keeping. (Our house is getting smaller by the second. Someone’s cursed us, I swear!)

So rather than storing ornaments, sparkles, trees and lights, I’m making new temporary baubles from recycled materials.

With that in mind I sat down to make my version (sweet and simple) of a winter village. I built a template that you can use to start your own winter wonderland, and I hope you’ll get as much peace and joy out of it as I did.

IMG_3286_chipboardvillage

Supplies

  • Scrap Chipboard: I like to save the backs of paper pads for projects like this, or you can grab a food package out of the recycling.
  • Pen and pencil
  • bone folder or scoring device
  • Craft knife
  • Paper glue: Elmer’s works great!
  • The printed template: click here or on the pdf below.

chipboardvillage_template

IMG_3287_chipboardvillage
Chipboard is great because you can mark it simply by pressing down hard on it. To trace the template on my piece, I clipped the paper down, then…

IMG_3300_chipboardvillage
used a bone folder and ruler to score the dotted lines (that will eventually be folded).

IMG_3308_chipboardvillage
Then I traced over the rest of the lines by pressing down firmly with a pen.

IMG_3312_chipboardvillage
Once I finished tracing all the lines I had a faint guide to work with. (If you like, trace the lines lightly with a pencil to help when you’re cutting.)

IMG_3316_chipboardvillage
Like most cutting projects, it’s easier to start by removing the small pieces of the template. In this case that meant cutting out the windows, the notch on the back, and two sides of the door. (Refer to the template to make sure you are cutting only the solid line pieces.)

IMG_3322_chipboardvillage
When I had the building and roof all cut out, I used a bone folder to score the folds a little more deeply. Then I began folding each flap gently away from the score mark. (Including the roof piece.)

IMG_3333_chipboardvillage
When I had the main part of the building folded, I applied glue to the flap (shown in gray on the template sheet) and held the pieces together until the glue held firmly. (You can also use clips or clothespins to hold it closed for a bit.) Once the base of the house was holding firmly, I added glue to the roof flaps (also shown in gray) and aligned and attached the roof. (You will want to hold this together by putting your hand into the house-box and pressing the flaps against the roof.)

IMG_3414_chipboardvillage
To frost the windows, I took a piece of cello tape slightly larger than the window, and attached it to a piece that was even larger. Then I taped that frosted pane right into the window-sash. I left the door bent slightly in, to welcome little chipboard guests!

Now that you’ve got the hang of home-building, you can reuse this template by resizing it, or come up with your own design!

IMG_3347_chipboardvillage
For my second building, I used the natural folds in a cracker box, and drew windows and a door with a pencil before trimming it out. Remember to leave flaps to attach the roof! (But in a pinch, a piece of tape will work as well.) Simply erase the lines, glue everything together, and plop it into your village… and when it gets dark…

IMG_3438_chipboardvillage
slip a few LED Christmas lights under your buildings for ambiance. (The notch I included in the template is super handy for running the wires out the back of the house.) Make sure to use low-heat lights, since they will be surrounded by paper!

IMG_3730_chipboardvillage
If you’re anything like me, you won’t be able to stop at chipboard houses. I really want to add some chipboard critters… These little houses make my imagination run free.

One thing that’s for sure, they need to be surrounded by a forest. Next week I’ll show you a quick and easy way to build your own magic woods.

 

One note: I’m a big fan of letting the materials show in my projects, but remember you can camouflage the materials quickly by adding a little paint (spray or acrylic would work great) or by using it as a base for decoupage or collage (like our shadowbox project). Go crazy!

SHOW+TELL: Easy Tiered Cardboard Display

IMG_2753_cardboarddisplay_1
Whenever I write a post about my favorite tools or methods I often get this wistful feeling; imagining someone inspired by the step-by-step instructions. I’m always so interested in figuring out how to use new tools, how to make everything myself– and I picture a couple of people taking some of my ideas and really making them their own. Changing up the steps, making use of their materials, and generally going crazy.

Viva creativity!

In the vacuum of cyberspace, I don’t get a chance to see too many examples of this, so while these little scenarios exist mainly in my brain, I thought I would share a simple display project inspired by my friend Tara (who LOVES spray paint), using the method from the box tutorial.

IMG_2735_cardboarddisplay_1
I’ve been wanting a nice tiered display for my Doodleware glasses, and finally I decided to build one. It simply consists of two boxes and a back flap that I painted black…

IMG_2743_cardboarddisplay_1
so that the etching detail can stand out.

Easy peasy, and basically free. It’s the perfect dimension to display the glasses in the cube I have available.

IMG_2775_cardboarddisplay_1
Now it’s that much easier to find the letter you’re looking for!

If you’ve done one of our projects, we’d love to see your finished piece! Email us at hello@adventures-in-making.com to tell us how it went.

Have something you’re dying to know about! We love questions. Send them to us and we’ll see if we can figure it out!

DIY: Finger Crochet a Round T-shirt Rag Rug

IMG_2201_roundtshirtrug
Despite my sister’s best efforts I’ve never been able to make sense of real crochet. The “finger crochet” method I describe below is something that came out of a lot of experimentation, but I’m guessing you fiber wizards could whip up something even better! If you’ve done a similar project, or have suggestions to make this DIY more clear, please feel free to tell us about it in the comments below.

When I finished re-weaving my t-shirt rug (updated photos at the bottom of that post) I figured out two important things.

  1. There is better way to cut a t-shirt into strips (fewer, longer strips.)
  2. Once you know how to cut t-shirts into long strips, no t-shirt is safe.

IMG_1957_roundtshirtrug
Which translates to: I had a lot of leftover strips of jersey, and wanted to use them up! I started braiding, tying knots, and eventually settled on a method that can best be described as the frumpy cousin of crochet.

PREP: Cutting one long strip

Knotting small strips of jersey (demonstrated in the woven rug post) is time-consuming, so the longer the strip the better. After digging around a bit I found this video that shows how to turn a loop into one long strip.

IMG_2100_roundtshirtrugI started by cutting the large loop of the shirt from the top, and sliced across from one side, stopping about an inch from the other edge.


Then I slipped the loop over my arms, and starting at the end of one cut I cut diagonally towards the end of the next cut on the other side of the fabric. Then the whole thing unwound in a continuous strip.

MAKING THE RUG


To begin I tied a slip-knot near the end of the string by making a loop, reaching through and grabbing the strip, pulling it though and gently pulling to tighten. (There’s a great demonstration of a slip knot at the beginning of this video.)

IMG_1975_roundtshirtrug
Then I reached through that loop, pinched the strip, and pulled it through to create my first chain stitch. (See steps 2 thru 4 on this Red Heart blog post). This whole project breaks down into pulling a new loop through an old loop.

I repeated this chain stitch about 5 times, then…


tucked the loose string end through the last chain stitch to loosely close the first set of chains into a circle.

IMG_2045_roundtshirtrug
To connect the next ring of chains I pulled the next strip (navy) through two existing loops– the one I just made (pictured here closest to my thumb), and the inside of an earlier chain that lined up with my new one (closer to my fingertip).

IMG_2047_roundtshirtrug
This way my newest loop connected my existing chain to the one inside of it. I then started a pattern of 3 chain stitches, 1 connecting stitch, 3 chain stitches, 1 connecting stitch, 3 chain stitches, 1 connecting stitch, 3 chain stitches, 1 connecting stitch, 3 chain stitches, 1 connecting stitch…

IMG_2070_roundtshirtrug
going around and around the circle.

IMG_2073_roundtshirtrug
When I ran out of strips, I pulled the end of my string through the last loop, and tucked it into the rug– because one day I will have more t-shirts to dismantle, and this rug will keep getting bigger!

IMG_2253_roundtshirtrug_1

TIPS

  • As you are working, make sure not to pull your loops too tight, or stretch your chain when you’re doing a connecting stitch. The looser you work the flatter the rug will sit.
  • Different shirts will make thicker or thinner strings based on the thickness of their fabric. I opted for a very irregular look with lots of inconsistencies in my strips (width ranging from 1″ – 2″) but if you want a more regular look, stick with shirts of a similar weight, and cut your strips about 1.25″ wide.
  • If it’s looking weird, pull out your loops and start over! Once you get the hang of this version of finger crochet you’ll fly through this project, so you will quickly make up the time redoing it. Practice has never been more fun.
  • If you can, work for longish stretches to keep your tension consistent. This is a great “while watching tv or daydreaming” activity.
  • As always, plan to make one more rug than you have cats.

IMG_2196_roundtshirtrug_1

SHOW+TELL: A Look at the Letterpress

IMG_1848_lookatletterpress
With the weather turning gloomy it’s becoming less practical (and pleasant) to work outside, but I have had more chances to work more with my lovely letterpress. It dawned on me (while I was listening to the clunking and whirring of the machine) that I haven’t ever shared my adventures with this 126-year-old guy, even though he takes up a huge space in my heart (and my bedroom.)

I thought I’d show you a couple of behind the scenes shots, and talk about my printing process.

An old etching of the letterpress model I work with, in the amazing American Wood Type book my mom passed down to me. Synchronicity?

There are a lot of great resources for learning about the history of printing (I’ve listed some resources below) so I won’t get too much into a subject that I’m learning more about all the time.

My first experience printing was at the University of Texas, on a Vandercook press using antique wood type (from the Rob Roy Kelly collection) and modern polymer plates. I eventually acquired a small table-top platen press (a Craftsmen Imperial) and started printing greeting cards and more using the same method I use today on my floor-standing platen press.

Nearly two years ago we moved the one-ton California Reliable into a corner of our bedroom, and it has become a my go-to for printing with love.

IMG_1907_lookatletterpress

Polymer plates before they are aligned on the aluminum base for printing.

While I still use lead type and wood type occasionally, I mainly print with polymer plates on an aluminum base. I draw up the artwork, scan it, clean it up and prep it for the plates, then send the artwork out to have plates made. The plates are somewhat similar to the clear sticky stamp sheets some people use with a clear block; however the material is much harder which allows for much more detail and lets it stand up to the high pressure of the letterpress. The height of the material has to be just right to bring it up to type high on the aluminum block and allow for the ink rollers to roll, and the printer to print.

IMG_1955

Hand carved linoleum blocks being printed on a small tabletop press.

Occasionally I get a wild hair and print from hand-carved linoleum blocks. There’s less perfection in this mode, but you can end up with really great results with lots of character. There’s a trick to raising the blocks up to the right height, but it’s definitely possible.

IMG_1894_lookatletterpress
There’s a long list of things I love about letterpress printing, but color is at the top. I love how each color I print is one solid color instead of being made up of a pointillistic nightmare of Cyan/Magenta/Yellow/Black. (There’s no room in my blue for little pink dots.) Each color on a letterpress print is printed separately; each color has its own plate. I’m a somewhat inexact ink mixer, but I always seem to end up at the right color (and I try not to get ink everywhere.)

IMG_1873_lookatletterpress

Printing the first color of a leafy card.

Alignment (registration) is something that has taken a little getting used to, but I’ve come up with a method that works great for me. Here you can see a couple of polymer plates on my aluminum base, printing the first color of a two-color card.


The opening and closing action on this Gordon-style press is powered by a flywheel and a foot-powered treadle. There is a single magical dance that inks the rollers on the ink plate, rolls them across the printing plate, then presses the paper into that plate to make a print. (I’m learning a little more all the time about the mechanics of this magic, but the first lesson was DON’T LEAVE YOUR HAND IN THERE.) I’m responsible for pumping with my foot/ankle/hip and feeding paper.

IMG_1862_lookatletterpress

Printing on paper handmade from the scraps of other cards.

One of the nicest things about the letterpress is that with a little ingenuity you can print on just about anything flat. Most of my pieces are printed on thick cover stocks, often 100% cotton. I’ve started printing more and more on sheets of handmade paper that I make from the trimmings of those other cards. I love the texture and softness of the paper I make, and I adore the fact that it means I’m contributing less to the landfills. (Want to know more about making paper? 1 2 3)

I’ve also just started to experiment with printing on fabric…. I have ideas….

IMG_1876_lookatletterpress
So that’s my old guy. Our love is still new, but I think it’s made to last.

Time will pass– I will get more ragged and he will get less, and he’ll always have new things to press.
I’ll keep learning.

IMG_1889_lookatletterpress

Resources and Links

Briar Press: A never ending resource for letterpress parts and printers
Letterpress Commons: Developed by Boxcar Press with articles and resources
Boxcar Press: My usual source for polymer plates and some other materials and supplies
Reich Savoy: One of the papers I print on.
Van Son Rubber Base Plus Ink: My preferred ink

DIY: Spookily Free and Easy Ghosts

IMG_1479_spookyghosts
When I was a kid my mom came up with all sorts of awesome crafts for us to do, and being a typical goth-in-the-making I loved the halloween crafts most of all. One year we made cheesecloth ghosts with balloons and glue and it’s a project that has haunted me to this day.

I decided that I really wanted some ghost friends, but lacking balloons and cheesecloth I decided to make some up, Alison style. (IE: Free, Quick, and Fun.)

IMG_1396_spookyghosts

SUPPLIES

  • At least a couple of feet of sheer or thin fabric – old sheets or window sheers work great!
  • All-purpose flour
  • Bottles: Soda, water, or wine. Glass or plastic.
  • Wire or wire coat hangers
  • Plastic bags
  • Rubber bands
  • Scissors
  • A bucket or bin to mix your flour paste in

Step 1: The Form

IMG_1417_spookyghosts
To begin will make a simple armature out of wire (or out of a wire hanger). Cut a piece about 24″ long, and twist it together to form one big loop.

IMG_1426_spookyghosts
Slip the loop over the neck of your bottle, and twist the arms slightly so that they sit securely on the bottle and point slightly upwards. Using a scrap piece of fabric or paper, form a ball shaped head over the neck of the bottle and secure it with a rubber band.

IMG_1440_spookyghosts
To make the armature (form of the ghost) easier to remove, cover it with a plastic grocery bag, and secure it with a rubber band.

Measure the height of your ghost form from the base, across the head, and to the base on the back side. Cut a square of fabric this size to cover your form. (This is a great time to tear your fabric instead of cutting, if you want. Frayed edges are a bonus!)

 

Step 2: Stiffening and Forming the Fabric

IMG_1447_spookyghosts
Although flour may not last forever when used as a paste, it works perfectly for a ghost that will only haunt your house for a year or two. Combine 4 parts water with 1 part all-purpose flour in a large container and mix well with your fingers. Soak your ghost fabric, and wring it gently.

IMG_1448_spookyghosts
Spread the fabric over the ghost form, with a corner of the fabric pointing forwards.

IMG_1450_spookyghosts
Using your creativity (and maybe a clip or two) shape the cloth as creepily as you want! (I loved adding a fold along the “hair line” so that it looked like my ghost was in a cloak.)

IMG_1456_spookyghosts
If you’d like, remove some of the excess fabric from the “arms” of your ghost. (Make sure to leave fabric puddled at the front and back; this will ensure that your ghost will sit up when it’s all dry.)

Leave your new little friend to dry overnight, with a fan blowing if you can. When it’s completely dry, gently pull the bottle form out of the stiff fabric. (If it’s not firm enough to stand, you can mix up some more of the flour and water and paint it onto your fabric while it’s still on the form. You may want to use a higher ratio of flour to water.)

IMG_1477_spookyghosts
Boo!

IMG_1485_spookyghosts

IMG_1505_spookyghosts
If you’re feeling extra crafty, you can paint right on your ghosts with watercolor or acrylic paints. I have some scary plans for one of mine.

IMG_1482_spookyghosts

Use What You’ve Got!

If you don’t have scraps of fabric lying around, this project is also fun with thin paper, tissue paper, or even paper towels. Just make one adjustment: instead of soaking the paper in your paste, lay the paper across your form and paint the paste on with your fingers or a craft paint brush. Saturate the paper slowly and let it fall again the form. You can add multiple layers of paper for more texture (like the tissue paper ghost above) and even cut out a mouth and eyes!

Stick an LED “candle” in it, and things get even creepier!

IMG_1626_spookyghosts
Scary Ghost Sound!

What’s frightening you this season?