DIY: Quick Printable Catnip Kicking Bag

img_6911kickingbag
This month’s DIY Challenge theme is Cats, so send in all your favorite kitty projects for the round-up at the end of the month. Visit the challenge page for more information, and use the handy-dandy form to upload your project photos. We can’t wait to see what you’ve made! Quick note to those of you who tend more to the barking or chirping animals – we welcome protest projects too. Show us why your favorite is better than our purring friends!

In typical cat fashion, my kitties seem to like toys that are not intended to be toys at all. You might think it’s a child-safe plug cover, but they think it’s the neatest thing since canned tuna. For a while they have been sharing a repurposed jack-o-lantern drawstring bag filled with catnip- and I decided it was time to give them something a little nicer. They do love the scale of the jack-o-lantern bag, which is long and wide unlike most catnip toys, so I decided to replicate the scale with a super-simple catnip kicking bag.

I wanted to customize the bags a bit, and I kept thinking about the lovely art Tara Bliven shared with us last month. I asked if she would write up a few feline words for us, and she did! You can use the free printable below to make this cat toy even cattier!

img_6743kickingbag

Supplies for two Bags

adventuresinmaking_kickingbagthb

Download and print out the Cat Fabric according to the specifications on the package.

img_6746kickingbag

Cut the fabric in half to make a sheet 10″ x 3.75″. Peel the backing paper off the fabric and stack it on top of the two pieces of thick fabric- with “right sides” facing out.

img_6748kickingbag

Stitch, 1/2″ in, around three sides and leave the fourth open.

img_6750kickingbag

Pour at least a teaspoon of dried catnip in the middle of your pocket…

img_6756kickingbag

Close the last side of the bag, and trim around it with pinking shears to limit fraying (and add character.)

img_6757kickingbag

Repeat with the second set of materials, and you’re done! A super cute sewing project that’s quick enough that you won’t mind when your kitties shed all over it. Now for the fun part…

(Warning, you are about to be bombarded with too many pictures of my kitties.)

img_6765kickingbag

img_6780kickingbag

img_6806kickingbag

The dangers of catnip trips. Very unflattering photos.

 

img_6871kickingbag

img_6889kickingbag

img_6863kickingbag

img_6908kickingbag

Success.

A couple of notes

  • The printable fabric is quite thin and I didn’t trust it to contain the catnip for very long, so I used it as an outside layer only. The catnip itself is contained within two layers of thicker fabric.
  • If you’re feeling adventurous, try this tutorial to make your own printable fabric!
  • If you are worried about your print running, try this vinegar bath solution to set your ink.
  • Tara is a wizard at decorative writing (and many other arts). Visit her website tarabliven.com  to find out how you can bring more of her awesomeness into your life.

DIY: Add a Kitten Pocket with Polish Remover and Sharpies

img_6722kittenpocket

This month’s DIY Challenge theme is Cats, so send in all your favorite kitty projects for the round-up at the end of the month. Visit the challenge page for more information, and use the handy-dandy form to upload your project photos. We can’t wait to see what you’ve made!

I like to “joke” that I have a kitten biological clock. Every couple of years I start thinking about how much fun kittens are, and how cute, and how nice it would be to have the pitter patter of little feet.

Dangerous.

To nip this in the bud this year, I’ve signed up for some future fostering, and came up with this little kitten pocket to bridge the gap. It’s based on a picture of Wee Cooper (our last kitten) and I thought I would share it so you can all have a kitten pocket of your very own.

img_6609kittenpocket

Supplies

  • Cotton Tote that kneads needs a kitten. It’s important to use cotton or another natural material because acetone can eat through a lot of synthetic materials.
  • 100% Acetone finger nail polish remover.
  • Cotton pads, balls, or rags.
  • Bone folder or similar tool for burnishing
  • Masking Tape
  • Sharpie Markers – Black and Silver
  • This kitten template* printed with a laser printer or copier. Use the reversed image on the right for transferring.

Step One: Printing and Prepping Your Template

Use a Laser Printer or Copier to print the Kitten Template* on a normal sheet of paper. Black and white is fine. It’s important to use a printer or copier that has TONER instead of ink. The transfer process with move some of that toner onto the fabric. If you try it with ink you’ll end up with a mess!

If you don’t have access to a toner-based printer or copier, or this process doesn’t work for some other reason, never fear! You can use a light table to trace the kitten on your bag, or use transfer paper to apply the design. You can see examples of those processes here and here.

After you have printed your page, cut out the cat and pocket on the right, leaving a large border.

img_6612kittenpocketb

Step Two: Layout Your Design

Decide where you want to put your kitten, and tape it firmly face down on your bag. Make sure everything is as straight and tight as you can make it.

img_6617kittenpocketb

Step Three: Blot and Burnish

Saturate a cotton pad with acetone, and press it into the paper. You will start to see the design through the paper. Saturate a small portion of the design with acetone, then switch to burnishing with your bone folder. Rub the side of the bone folder on the paper to press it firmly down into the fabric. Repeat on small sections of the design, then go back over each portion one or two times, adding more acetone and pressure.

img_6620kittenpocketb

If you can, peak to make sure that you have transferred the kitten. If not, you may want to repeat the process with more acetone and more pressure. If you see the design, move to the next step!

If you don’t see anything at all, there’s a chance your printer won’t work for this process. Don’t fear! You can use a light table to trace the kitten on your bag, or use transfer paper to apply the design. You can see examples of those processes here and here.

img_6623kittenpocketb

Step Four: Fill it in

If you used a smooth material and have a good transfer you could skip this step altogether– it’s up to you. If you’d like, use a black Sharpie to darken in the design. You can use the left side of the template as a reference for portions you can’t see as well on the transfer.

img_6626kittenpocketb

When you have the kitten filled in, use a silver Sharpie to add in the whiskers. It will show up on the black of the kitten and on the light bag as well!

img_6658kittenpocket

When you’re done let it dry for a couple of minutes, pile all your stuff in it, and take a kitten everywhere you go.

img_6713kittenpocket

Purrfect.

 

 

 

*Kitten template includes an original illustration by Alison Lang. We’re happy to share files for personal and educational purposes, but please don’t use it for anything else without our permission. Thanks!

DIY: Recycled Rainbow Mobile

1608_diychallenge_logo_wide

This month’s DIY Challenge theme is Rainbows, so send in all your favorite rainbow projects for the round-up at the end of the month. Visit the challenge page for more information, and use the handy-dandy form to upload your project photos. We can’t wait to see what you’ve made!

IMG_6311_rainbowmobile

Rainbows are amazing. They’re awe inspiring in the sky, they are a great way to organize things*, and they are just plain magical.

This little recycled rainbow mobile tries to be a few of those things- and has the added bonus of being a nifty reason to doodle.

IMG_6152_rainbowmobile

SUPPLIES

IMG_6164_rainbowmobile

Use the thick material punch to cut circles out of every piece of plastic you can find. Don’t worry, the idea of using recycleables for art will make you look insane. Embrace it. (;

IMG_6179_rainbowmobile

Use your rainbow of markers to doodle decorations on each circle. It’s okay if you have an uneven amount of some color because you think orange is terrible, just have fun!

IMG_6185_rainbowmobile

Tie three strings to your top ring, and tie those three together to hang the ring parallel to the ground. Find a place to hang this ring while you work.

IMG_6425_rainbowmobile

Choose one of your most popular colors (purple for me), and poke a small hole near the top of each piece with a safety pin. Cut a piece of thread approximately 12″ long, and string it through one of the holes. Tie the ends of the thread together, and attach it to the hanging ring using a lark’s head knot. Repeat this for each circle of this color.

IMG_6197_rainbowmobile

Choose the next color in the rainbow (blue in my case) and poke each piece like you did before. This time add two inches to your thread for a length of 14″. Attach each of these pieces to your ring.

IMG_6202_rainbowmobile

Continue by adding 2 inches to the length of each new color until you have tied all of your pieces to the ring.

IMG_6213_rainbowmobile

When you have finished, hang it in a bright window and watch it sway and catch the light.

IMG_6227_rainbowmobile

IMG_6317_rainbowmobile

See, sometimes trash-art is fun!

 

*I may or may not be one of those people who sorts books by color. My librarian mother may be driven insane by this fact.

DIY: Watercolor & Wax Paper Jewelry

IMG_6410_waxedpaperjewelry

Sometimes I come up with a project that I enjoy so much that it’s hard to stop to write a post. This, my friends, is one of those.

It’s a simple combination of watercolor, melting wax, and punching shapes- but it’s oh so satisfying.

 

SUPPLIES

  • Thick paper for Watercolor
  • Watercolor paints and brushes
  • Pencil
  • Straight Edge
  • Paraffin Wax
  • Scraping Tool, like a vegetable peeler.
  • Iron, ironing board, towel or other surface to catch wiley bits of wax
  • Parchment Paper
  • Scissors
  • Large Thick Material Punches (optional but recommended) I used circle punches in 2″ diameter, 1.5″ diameter, and 1″ diameter
  • Small hole punch
  • Thin cord or ribbon
  • Jump Rings (optional)

Step One: Paint it

IMG_6321_waxedpaperjewelry

Gather your paper, pencil, straight edge, paints and brushes.

IMG_6325_waxedpaperjewelry

Draw several parallel lines with your pencil to create stripes of varying widths.

Begin filling in each stripe with a color in the order of the rainbow. (ROY G BIV –  Red Orange Yellow Green Blue Indigo Violet).

If you fill a small stripe, use a similar color next to it (Orange red and Red for instance.) It’s okay if your paint is a little irregular, or you have small white spaces.

IMG_6341_waxedpaperjewelry

Now it’s time to paint the back of your pendant. Draw some non-parallel lines on a new piece of paper, and fill them in with some of the same colors you used on the other side. Leave a little white space as well. Set your paintings aside to dry.

Step Two: Wax it

IMG_6344_waxedpaperjewelry

Now you will need your ironing setup, parchment paper, and wax. You might have a little wax escape during the ironing process, so it’s a good idea to have a scrap towel or cotton fabric to protect your ironing board. Remember to keep an eye on your ironing so you don’t singe anything!

IMG_6345_waxedpaperjewelry

Sandwich one of your dry watercolor sheets inside a piece of parchment paper. Shred a pile of wax on top. (You can always add more wax, so this is a good time to play!)

IMG_6347_waxedpaperjewelry

Turn your iron to it’s lowest setting, and gently melt the wax between the sheets of parchment paper. You will see the paper start to look wet. Continue working the liquid wax into the paper until it starts to be consistently translucent. You may want to add more wax.

IMG_6349_waxedpaperjewelry

Flip your paper over, and add a pile of wax to the other side. This will be the “glue” that holds your two sides together.

IMG_6350_waxedpaperjewelry

Lay the other piece of paper on top of that pile…

IMG_6352_waxedpaperjewelry

shred some more wax on that, and iron again following the earlier instructions.

IMG_6355_waxedpaperjewelry

Continue to add wax until the papers are translucent and consistently wet looking. When you’re happy with the look, put a little bit of weight on the stack, and let it cool for a couple of minutes.

IMG_6356_waxedpaperjewelryWhen it is still warm, but safe to touch, uncover the paper, and use your finger or a tool to smooth any puddles of wax. (Playing in wax is one of my favorite things!) Now let it cool completely (a few minutes.)

Step Three: Punch it

IMG_6359_waxedpaperjewelry

I am loving these thick material punches from Fiskars. I have long abused normal paper punches, and they have a habit of breaking at the worst possible moment. These punches go through everything like butter.

IMG_6361_waxedpaperjewelryUse a punch (or scissors) to take shapes out of your waxed paper…

IMG_6365_waxedpaperjewelry

until you have a nice little pile of shapes to work with. To turn solid shapes into pendants, punch small holes on one or two sides. You can run cord through these holes (or attach jump rings.)

IMG_6368_waxedpaperjewelry

After you have everything cut out, polish the shapes by using your fingers to rub excess wax off the surface and edges.

IMG_6404_waxedpaperjewelry

Feed thin ribbon, cord, or chain through the holes in your pendants. You can feed your cord through, wrap it several times, or tie a lark’s head knot. Anything goes! Leave enough room to slip the necklace over your head, and you’re set.

IMG_6395_waxedpaperjewelry

Double sided rainbow pendants!

Now I want to wax all the paper. Someone stop me before I go too far!

DIY: Fairy In A Jar (with a free printable fairy!)

I have been fascinated by the whimsical mystery of the fairy folk since I was a little girl. I remember looking for them while playing outside and making up tiny little fairy houses using sticks, leaves and flowers I would collect in my own backyard. This project is a fun activity to do with your kids. Download the free printable fairy art and let them color their fairy. Then help them create a little terrarium in a jar for the fairy to be displayed in!

DIY: Fairy In A Jar (with a free printable fairy)

Supplies Needed

Free printable fairy
• White card stock
• Coloring supplies (watercolors, markers, colored pencils, etc.)
• Glass jar
• Small wood slice (small enough to fit inside the lid of the jar)
• Faux flowers
• Tiny mushrooms
• Moss

Additional tools:
• Scissors
• Glue stick
• Kraft glue
• Hot glue gun

DIY: Fairy In A Jar (with a free printable fairy)

Download the free printable fairy art and print onto white card stock. You’ll notice that there are two different sizes. Choose one to fit your jar (you can also shrink the art down smaller if necessary). Color in the fairy (front and back) with your favorite coloring supplies.

DIY: Fairy In A Jar (with a free printable fairy)

Once you’ve finished coloring, carefully cut out both fairies with scissors and use a glue stick to glue them back-to-back. Choose a faux flower and cut off a few petals into the shape of a skirt. Glue a petal skirt onto the fairy using kraft glue (both front and back sides).

DIY: Fairy In A Jar (with a free printable fairy)

Next plug in your hot glue gun. Once warm, squeeze some hot glue onto the center of the wood slice and place the fairy’s feet into the hot glue. Hold in place until the glue is dry and she can stand up on her own. Add a few tiny mushrooms around her feet.

DIY: Fairy In A Jar (with a free printable fairy)

Place the mounted fairy into the lid of the jar. Add some moss around the edges then place the jar over the fairy and tighten the lid. Optional: hot glue some ribbon around the base of the lid.

DIY: Fairy In A Jar (with a free printable fairy)

If you want her to be secure inside the jar you can hot glue the wood slice base to the inside of the lid. I personally liked being able to take her out and let her explore my garden before returning back to jar for display.

DIY: Fairy In A Jar (with a free printable fairy)
DIY: Fairy In A Jar (with a free printable fairy)

SHOW+TELL: Spray Paint a Briar Rug

IMG_6052_briarrug

There once was a girl named Alison who had an awkward entry space and no good options. She went searching for a rug to protect what was left of her ugly carpet. She went to store after store with no luck, instead bringing home a rug that was so bland it made her cry.

IMG_5981_briarrug

No really. I could find NOTHING that I liked. Everything was either too small, too bold, to “contemporary”, or too “tempting for a cat to destroy.” I decided that bland was better than something that was REALLY not me, and I grabbed a can of spray paint in case I got inspired.

This month’s theme was a great chance to embrace my inner subtly-secret-goth-girly-girl and decorate the rug with a few briars (á la Sleeping Beauty, or Briar Rose.)

 

IMG_5990_briarrug

I used Con-Tact paper to make a mask for the rug. I cut a bunch of free-hand curved pieces, and laid them across each side of the rug in a random arrangement. When each piece was in a location I liked, I stepped on it to adhere it to the rug firmly ( are an awesome tool, too!) Once I had the stems all lined up, I began to decorate each with triangles of thorns.

IMG_5995_briarrug

When I was happy with everything, I sprayed a thin layer of white all-purpose spray paint across the rug, paying special attention to the edges of the mask. Then I tortured myself by leaving the whole thing to dry a few hours before removing the mask and seeing what it was going to look at.

IMG_5998_briarrug

After those couple of hours, I gently peeled the mask material off of the rug…

IMG_5999_briarrug

and had the big reveal.

IMG_6074_briarrug

After airing the rug out overnight, I put it in place in my entry space.

IMG_6070_briarrug

No more bland rug!

 

Here’s a word of warning: This was so fun and transformative that I want to spray paint everything in the house now.

I’ve got my eye on you, dining rug… what do you think about circles?

May DIY Craft Challenge: Once Upon A Fairytale

Thank you to everyone who participated in last month’s DIY Craft Challenge! We just love seeing the awesome things you all make and feel so inspired by the ‘garden’ themed submissions we received. Be sure to check out our roundup post of what everyone made here!

Once Upon A Fairytale…

This month we are diving into a world of magic and make believe! ‘Fairytales’ is the theme for May and we invite you to find inspiration in your favorite storybook. So channel your inner child (and invite the kids in your life to join in) and enter a world of wonder this month. Have tea with the fairies in your backyard, host your own fairytale theme puppet show, or bake a cake that’s fit for a Queen! Wherever this month’s theme takes you, we hope you’ll share your own handmade magic with us!
1605_diychallenge_logo_wideMay DIY Craft Challenge: Once Upon A Fairytale

Inspiration Sources:

1. Emerald City Fairy House by Florence Griswold Museum
2. Finger Puppets by Lia Griffith
3. Storybook Clock by Amanda Patterson
4. Fairy Tea Set by Twig & Toadstool
5. Felt Mushrooms by Lil Fish Studios
6. Clothes Peg Fairies by The Imagination Tree
7. Fairytale Storytelling Game by Let’s Play Music
8. Paper Plate Dragons by Pink Stripey Socks
9. DIY Woodland Acorn Necklace by Flamingo Toes
10. Doily Hot Air Balloons by Joann’s
11. Sandcastle Place Cards by Oh Happy Day!

HOW TO ENTER

Click here for details on how to enter your project to the DIY Challenge! Don’t forget to share your projects with everyone on Instagram using #diycraftchallenge.

The challenge officially begins today, May 1st and ends on May 29th, 2016. We will post a roundup of everyone’s projects on May 31st. Have fun and happy crafting!

Need more inspiration?

Take a look out our Pinterest board for more stitch inspired project ideas.

APRIL DIY Challenge Roundup

Don’t know what it’s like where you are, but in the Pacific Northwest we’ve had a confusing collection of warm sunny days and cold rainy days. The plants seem to like it, though. It looks like spring!

We’re excited to present this little round-up of Garden inspired projects from you (and people just like you).

1604_diychallenge_logo_wide

claire_DSC0858-sm
Claire made an upcycled window herb planter that has us buzzing.

This craft composed of 2 parts: the first was painting a cheesy pun and some bees onto an old window. The second part was decoupaging some old tin cans with insects to attach to the window and use as a herb planter.

She has provided free templates and instructions to make your own herb window at her blog – Pillar Box Blue.


maura_IMG_4981
Maura, The Messy Brunette, shared these amazing crocheted blooms (and a nest she found in her garden in Ireland).

Weather hasn’t been great here to get out in the garden but I did manage to make some little flowers…


cintia7
Spring has long since passed in Córdoba, Argentina; home of Cintia and Sol de Noche {deco crochet}; but she’s bringing a little of the garden in, in a beautiful way.

As Winter is just around the corner here, I decided to bring some of my plants inside. Your theme has given me the chance to recycle some jute I had and leftover yarn in order to create these crochet pot covers.


tara_IMG_0788

Tara submitted a little of her amazing artsiness  (and legendary lettering) in these swoon-worthy practice pieces.

…just experimenting with gouache and brush lettering. 


donna_signDonna sent in this lovely spring wreath.

I wasn’t planning to make a new wreath for our front door this spring, but as the weather got warmer, I decided I wanted something new.  I had an idea and went to the store to buy some pretty artificial flowers, some ribbon, and a wreath form.

She added a welcome sign to the center, and it turned out wonderfully. You can see more photos on her blog.


becky_image1

Becky Kimberly of Cotswoldcre8 shared these awesome bright fiber flowers.

I’m a self-employed community artist whose been experimenting with gorgeous Marino wool create  to funky 3-D blooms!


I love finishing the roundup with a project that reminds me of the next theme, too! Rachel and I have been hard at work on the May theme, and hope you’ll be happily ever after surprised.

 

 

DIY: Plantable Felt Vegetable Garden (Part 2)

DIY: Plantable Felt Vegetable Garden tutorial (Part 2)
Stitching up felt veggies has become my newest obsession. They’re easy to make, and so much fun to watch kids play with! Yesterday, I shared PART 1 of this tutorial where we made a garden planter box, tomatoes, strawberries and faux plants for them to ‘grow’ on. Today we’ll be making… you guessed it! More veggies for our play garden!

DIY: Plantable Felt Vegetable Garden tutorial (Part 2)

Materials:

• Felt (pinks, purples, greens, and oranges)
• Needle and thread (in coordinating colors)
• Pins and fabric scissors
• Fiberfill
• Pipe cleaners
• Velcro
• Faux greenery (for the ‘plants’)
Free printable pattern

Helpful Links

PART 1 (Tutorials for the planter box, tomatoes, and strawberries)
Felt Cabbage tutorial by Fairfax
Felt Mushroom tutorial by Fairyfox

A special note: There is no right or wrong way to sew any of the felt veggies in this tutorial! You can use a sewing machine, or hand-stitch them all (like I did). My mom and I discovered different ways to make these as we went along and all methods are correct! So if you find your own way, that’s great! And if your tomato turns out a little wonky, even better! Since discovering a ‘real’ odd shape veggie growing in your garden is one of the many pleasures of growing anything.

Step One: Beets!

DIY: Plantable Felt Vegetable Garden tutorial (Part 2)

Print out the pattern provided and cut out your pieces from pink and dark green felt. Thread your needle with pink thread and tie a knot at the end.

DIY: Plantable Felt Vegetable Garden tutorial (Part 2)

Slightly overlap each edge with the one adjacent and whip stitch together (as shown below in photo 1). Repeat on the other three edges until the beet is sewn all the way around (photo 2). Next, use a straight stitch to sew around the outside of the beet (photo 3). Stuff with fiberfill and cinch the opening closed and set aside (we will cinch closed completely, tie a knot and tie off later) (photo 4).

Now to sew the beet’s stalk and leaves! Cut a length of pipe cleaner and thread a needle with green thread (photo 6). Place the pipe cleaner on top of the green stem and then place a pink stalk on top of the pipe cleaner. Holding all three pieces together, whip stitch around the entire pink stock with the pipe cleaner enclosed inside. Trim any excess pipe cleaner from the bottom (photo 7). Repeat this process for the second leaf/stalk.

Now all we have to do is connect the stalk/leaves to the beet. Insert the stalks into the center of the beet and cinch closed (around the stalks). Make a few stitches back and forth and around the stalks to secure the beet and the stalks tightly together (photo 8). Tie off and you’re done!

DIY: Plantable Felt Vegetable Garden tutorial (Part 2)

DIY: Plantable Felt Vegetable Garden tutorial (Part 2)

Step Two: Carrots!

DIY: Plantable Felt Vegetable Garden tutorial (Part 2)

Cut out the pieces using the pattern provided from orange and light green felt. Thread your needle with orange thread and tie a knot at the end (see photo 1 below). Poke your needle into the tip of the orange triangle and pull through (photo 2). Turn the edges together, with them slightly overlapped, whipstitch all the way up to create the shape of a carrot (photo 3). Stuff the carrot with fiberfill (photo 4) and straight stitch around the top. Insert the leaves and cinch the carrot closed. Make a few small stitches around the base of the leaves to secure together and tie off.

DIY: Plantable Felt Vegetable Garden tutorial (Part 2)

felt-vegetable-garden-6

Step Three: Eggplants!

DIY: Plantable Felt Vegetable Garden tutorial (Part 2)
Cut out the pieces using the pattern provided, thread your needle with dark color thread and tie a knot at the end (photo 1). Slightly overlap the edges of two purple felt pieces and whip stitch together up one side. Then add the third piece and whipstitch that on so that all three pieces are now connected (photo 2). Next bring the edges together and sew up the last side to create an eggplant shape (photo 3). Stuff with fiberfill, stitch closed and tie off (photo 4).

DIY: Plantable Felt Vegetable Garden tutorial (Part 2)

Finally, add the leaf. Thread your needle with green thread and backstitch down the center of each ‘petal’ of the leaf to secure onto the eggplant (photo 5). Cut a small piece of velcro (the soft ‘loop’ side) and stitch it anywhere near the top of the leaf. Repeat to make as many eggplants as you like! (I made three to grow on one plant).

Step Four: Make the Plant!

Just like with the strawberries and tomatoes, I used faux greenery to make a plant for the eggplants to ‘grow’ from. Simply cut off a plant size sprig and stitch little pieces of Velcro (using the ‘hook’ or sticky side) onto the leaves and/or stems. Once you’ve finished adding the Velcro, you are ready to plant your eggplants!
DIY: Plantable Felt Vegetable Garden tutorial (Part 2)

DIY: Plantable Felt Vegetable Garden tutorial (Part 2)

DIY: Plantable Felt Vegetable Garden tutorial (Part 2)

DIY: Plantable Felt Vegetable Garden (Part 1)

Plant the seeds of joyful gardening and teach your child how to tend to their very own felt vegetable garden! This is a great project that can be turned into the ultimate garden playtime complete with a garden planter box, plants, and ‘pickable’ fruits and veggies. Also, don’t forget the play watering can!

felt-vegetable-garden-47

My twin nieces will be two years old this June and I plan on gifting them their own felt garden to play with. I first had the idea last winter and had originally planned to make this as a Christmas gift but with the craziness of the holiday season, I wasn’t able to start working on it until Christmas day! Since then, my mom and I have spent many evenings stitching up these felt veggies. Not only are they simple to make and impossible to ‘mess up’ (since imperfections in homegrown veggies is part of the magic of gardening), these felt veggies are also addicting! Once you stitch up a strawberry, you’ll be hooked by its utter cuteness and want to make more!

felt-vegetable-garden-1

Materials:

• Felt (reds and greens)
• Needle and thread (in coordinating colors)
• Pins and fabric scissors
• Fiberfill
• Embroidery floss (green and white)
• Velcro (loop and hook)
• Brown felt (for the ‘dirt’)
• Wooden crate
• Faux greenery (for the ‘plants’)
Free printable pattern

Step One: Make the planter box

felt-vegetable-garden-45

You’ll need a wooden crate, brown felt (or cotton fabric), and fiberfill. I used a sewing machine to sew the pretend dirt but you could also hand-stitch them together. To create the rows of ‘dirt’, you’ll basically be making four mini bolsters that fit snuggly into the crate.

felt-vegetable-garden-diy

Start by cutting two 4 ½” circles (see pattern) and one rectangle 15 1/8” x 11 ¾” in size. Fold the rectangle in half (hamburger style) and sew along the edge leaving approx. 1/2” seem allowance to create a sleeve. Then pin one felt circle to the sleeve with the wrong sides facing out as shown in the photo 2.

Sew all the way around the edge of the circle. Then repeat on the other end, making sure to leave a 2” opening so you can turn the whole thing right side out (see photo 3). Turn right side out and stuff with fiberfill (photo 4). Then hand-stitch the opening closed. Repeat this process to make three more mini bolsters (or however many will fit in your crate).

felt-vegetable-garden-26

A special note: There is no right or wrong way to sew any of the felt veggies in this tutorial! You can use a sewing machine, or hand-stitch them all (like I did). My mom and I discovered different ways to make these as we went along and all methods are correct! So if you find your own way, that’s great! And if your tomato turns out a little wonky, even better! Since discovering a ‘real’ odd shape veggie growing in your garden is one of the many pleasures of growing anything.

Step Two: Tomatoes!

felt-vegetable-garden-53

Print out the pattern provided and cut out your pieces from red and green felt. Thread your needle with red (or pink) thread, and tie a knot at the end (photo 1). Slightly overlap two red pieces and whip stitch them together as shown in photo 2. Then repeat with the other two red pieces. Next, whip stitch the two halves together, leaving a small opening to stuff with fiberfill. Then stitch the opening closed and tie off your thread (photo 3).

tomato-tutorial

Thread a length of green embroidery floss (or green thread works too) and back stitch the leaf to the top of the tomato as shown in photo 4.

Finish up the tomato by adding a stem with a Velcro leaf. Start by threading your needle using green thread and tie a knot at the end (photo 5). Then roll the square end of the stem piece together and stitch closed as shown in photos 6 and 7. Cut a small piece of Velcro (the soft/fuzzy ‘loop’ side) and stitch into the inside of the leaf. You can also trim the length of the stem to your desired length (photo 8).

Lastly, stitch the stem onto the tomato and tie off your thread (photo 9). And that’s it! You’ve made your first tomato! Repeat to make as many as you like (I made three to hang on a single plant).

felt-vegetable-garden-54

Step Three: Strawberries!

felt-vegetable-garden-51

Cut out your pieces using the pattern provided. Then thread your needle with red thread and tie a knot at one end (photo 1). Whip stitch the two red pieces together along the rounded edge only (just like you did with the tomatoes). Then straight stitch around the opening, stuff with fiberfill and pull the threads to cinch the opening closed (photo 2). Tie securely with a knot and tie off.

Next add ‘seeds’ to the strawberry using some white embroidery floss. Start by inserting your threaded needle into the top of the strawberry (the knot will soon be covered up by the top leaf) and make small straight stitches all around the berry (photo 3). When finished, poke the needle back up through the top and tie off. Then, thread your needle with green embroidery floss and sew the leaf onto the top of the berry (making sure to cover the white knots) (photo 4).

strawberry-tutorial

Finally stitch a small piece of Velcro (fuzzy ‘loop’ side) onto the top of the strawberry. And you’re done! Repeat to make as many strawberries as you like! I made 4 berries per plant.

felt-vegetable-garden-21

felt-vegetable-garden-52

Step Four: Make the plants!

I used faux greenery to make plants for the tomatoes and strawberries to ‘grow’ from. Simply cut off a plant size sprig and stitch little pieces of Velcro (using the ‘hook’ or sticky side) onto the leaves and/or stems. Once you’ve finished adding the Velcro, you are ready to plant your berries and tomatoes!

felt-vegetable-garden-27

Additional Links:

Here are links to two great tutorials by Fairy Fox that I used to make both the felt cabbages and mushrooms.

Cabbage tutorial
Felt Mushroom tutorial

felt-vegetable-garden-48

Be sure to stay tuned tomorrow for PART 2 of this tutorial where we’ll be making carrots, beets and even eggplants!

felt-vegetable-garden-57