DIY: Quick Printable Catnip Kicking Bag

img_6911kickingbag
This month’s DIY Challenge theme is Cats, so send in all your favorite kitty projects for the round-up at the end of the month. Visit the challenge page for more information, and use the handy-dandy form to upload your project photos. We can’t wait to see what you’ve made! Quick note to those of you who tend more to the barking or chirping animals – we welcome protest projects too. Show us why your favorite is better than our purring friends!

In typical cat fashion, my kitties seem to like toys that are not intended to be toys at all. You might think it’s a child-safe plug cover, but they think it’s the neatest thing since canned tuna. For a while they have been sharing a repurposed jack-o-lantern drawstring bag filled with catnip- and I decided it was time to give them something a little nicer. They do love the scale of the jack-o-lantern bag, which is long and wide unlike most catnip toys, so I decided to replicate the scale with a super-simple catnip kicking bag.

I wanted to customize the bags a bit, and I kept thinking about the lovely art Tara Bliven shared with us last month. I asked if she would write up a few feline words for us, and she did! You can use the free printable below to make this cat toy even cattier!

img_6743kickingbag

Supplies for two Bags

adventuresinmaking_kickingbagthb

Download and print out the Cat Fabric according to the specifications on the package.

img_6746kickingbag

Cut the fabric in half to make a sheet 10″ x 3.75″. Peel the backing paper off the fabric and stack it on top of the two pieces of thick fabric- with “right sides” facing out.

img_6748kickingbag

Stitch, 1/2″ in, around three sides and leave the fourth open.

img_6750kickingbag

Pour at least a teaspoon of dried catnip in the middle of your pocket…

img_6756kickingbag

Close the last side of the bag, and trim around it with pinking shears to limit fraying (and add character.)

img_6757kickingbag

Repeat with the second set of materials, and you’re done! A super cute sewing project that’s quick enough that you won’t mind when your kitties shed all over it. Now for the fun part…

(Warning, you are about to be bombarded with too many pictures of my kitties.)

img_6765kickingbag

img_6780kickingbag

img_6806kickingbag

The dangers of catnip trips. Very unflattering photos.

 

img_6871kickingbag

img_6889kickingbag

img_6863kickingbag

img_6908kickingbag

Success.

A couple of notes

  • The printable fabric is quite thin and I didn’t trust it to contain the catnip for very long, so I used it as an outside layer only. The catnip itself is contained within two layers of thicker fabric.
  • If you’re feeling adventurous, try this tutorial to make your own printable fabric!
  • If you are worried about your print running, try this vinegar bath solution to set your ink.
  • Tara is a wizard at decorative writing (and many other arts). Visit her website tarabliven.com  to find out how you can bring more of her awesomeness into your life.

DIY: Recycled Rainbow Mobile

1608_diychallenge_logo_wide

This month’s DIY Challenge theme is Rainbows, so send in all your favorite rainbow projects for the round-up at the end of the month. Visit the challenge page for more information, and use the handy-dandy form to upload your project photos. We can’t wait to see what you’ve made!

IMG_6311_rainbowmobile

Rainbows are amazing. They’re awe inspiring in the sky, they are a great way to organize things*, and they are just plain magical.

This little recycled rainbow mobile tries to be a few of those things- and has the added bonus of being a nifty reason to doodle.

IMG_6152_rainbowmobile

SUPPLIES

IMG_6164_rainbowmobile

Use the thick material punch to cut circles out of every piece of plastic you can find. Don’t worry, the idea of using recycleables for art will make you look insane. Embrace it. (;

IMG_6179_rainbowmobile

Use your rainbow of markers to doodle decorations on each circle. It’s okay if you have an uneven amount of some color because you think orange is terrible, just have fun!

IMG_6185_rainbowmobile

Tie three strings to your top ring, and tie those three together to hang the ring parallel to the ground. Find a place to hang this ring while you work.

IMG_6425_rainbowmobile

Choose one of your most popular colors (purple for me), and poke a small hole near the top of each piece with a safety pin. Cut a piece of thread approximately 12″ long, and string it through one of the holes. Tie the ends of the thread together, and attach it to the hanging ring using a lark’s head knot. Repeat this for each circle of this color.

IMG_6197_rainbowmobile

Choose the next color in the rainbow (blue in my case) and poke each piece like you did before. This time add two inches to your thread for a length of 14″. Attach each of these pieces to your ring.

IMG_6202_rainbowmobile

Continue by adding 2 inches to the length of each new color until you have tied all of your pieces to the ring.

IMG_6213_rainbowmobile

When you have finished, hang it in a bright window and watch it sway and catch the light.

IMG_6227_rainbowmobile

IMG_6317_rainbowmobile

See, sometimes trash-art is fun!

 

*I may or may not be one of those people who sorts books by color. My librarian mother may be driven insane by this fact.

DIY: Watercolor & Wax Paper Jewelry

IMG_6410_waxedpaperjewelry

Sometimes I come up with a project that I enjoy so much that it’s hard to stop to write a post. This, my friends, is one of those.

It’s a simple combination of watercolor, melting wax, and punching shapes- but it’s oh so satisfying.

 

SUPPLIES

  • Thick paper for Watercolor
  • Watercolor paints and brushes
  • Pencil
  • Straight Edge
  • Paraffin Wax
  • Scraping Tool, like a vegetable peeler.
  • Iron, ironing board, towel or other surface to catch wiley bits of wax
  • Parchment Paper
  • Scissors
  • Large Thick Material Punches (optional but recommended) I used circle punches in 2″ diameter, 1.5″ diameter, and 1″ diameter
  • Small hole punch
  • Thin cord or ribbon
  • Jump Rings (optional)

Step One: Paint it

IMG_6321_waxedpaperjewelry

Gather your paper, pencil, straight edge, paints and brushes.

IMG_6325_waxedpaperjewelry

Draw several parallel lines with your pencil to create stripes of varying widths.

Begin filling in each stripe with a color in the order of the rainbow. (ROY G BIV –  Red Orange Yellow Green Blue Indigo Violet).

If you fill a small stripe, use a similar color next to it (Orange red and Red for instance.) It’s okay if your paint is a little irregular, or you have small white spaces.

IMG_6341_waxedpaperjewelry

Now it’s time to paint the back of your pendant. Draw some non-parallel lines on a new piece of paper, and fill them in with some of the same colors you used on the other side. Leave a little white space as well. Set your paintings aside to dry.

Step Two: Wax it

IMG_6344_waxedpaperjewelry

Now you will need your ironing setup, parchment paper, and wax. You might have a little wax escape during the ironing process, so it’s a good idea to have a scrap towel or cotton fabric to protect your ironing board. Remember to keep an eye on your ironing so you don’t singe anything!

IMG_6345_waxedpaperjewelry

Sandwich one of your dry watercolor sheets inside a piece of parchment paper. Shred a pile of wax on top. (You can always add more wax, so this is a good time to play!)

IMG_6347_waxedpaperjewelry

Turn your iron to it’s lowest setting, and gently melt the wax between the sheets of parchment paper. You will see the paper start to look wet. Continue working the liquid wax into the paper until it starts to be consistently translucent. You may want to add more wax.

IMG_6349_waxedpaperjewelry

Flip your paper over, and add a pile of wax to the other side. This will be the “glue” that holds your two sides together.

IMG_6350_waxedpaperjewelry

Lay the other piece of paper on top of that pile…

IMG_6352_waxedpaperjewelry

shred some more wax on that, and iron again following the earlier instructions.

IMG_6355_waxedpaperjewelry

Continue to add wax until the papers are translucent and consistently wet looking. When you’re happy with the look, put a little bit of weight on the stack, and let it cool for a couple of minutes.

IMG_6356_waxedpaperjewelryWhen it is still warm, but safe to touch, uncover the paper, and use your finger or a tool to smooth any puddles of wax. (Playing in wax is one of my favorite things!) Now let it cool completely (a few minutes.)

Step Three: Punch it

IMG_6359_waxedpaperjewelry

I am loving these thick material punches from Fiskars. I have long abused normal paper punches, and they have a habit of breaking at the worst possible moment. These punches go through everything like butter.

IMG_6361_waxedpaperjewelryUse a punch (or scissors) to take shapes out of your waxed paper…

IMG_6365_waxedpaperjewelry

until you have a nice little pile of shapes to work with. To turn solid shapes into pendants, punch small holes on one or two sides. You can run cord through these holes (or attach jump rings.)

IMG_6368_waxedpaperjewelry

After you have everything cut out, polish the shapes by using your fingers to rub excess wax off the surface and edges.

IMG_6404_waxedpaperjewelry

Feed thin ribbon, cord, or chain through the holes in your pendants. You can feed your cord through, wrap it several times, or tie a lark’s head knot. Anything goes! Leave enough room to slip the necklace over your head, and you’re set.

IMG_6395_waxedpaperjewelry

Double sided rainbow pendants!

Now I want to wax all the paper. Someone stop me before I go too far!

DIY: Fairy In A Jar (with a free printable fairy!)

I have been fascinated by the whimsical mystery of the fairy folk since I was a little girl. I remember looking for them while playing outside and making up tiny little fairy houses using sticks, leaves and flowers I would collect in my own backyard. This project is a fun activity to do with your kids. Download the free printable fairy art and let them color their fairy. Then help them create a little terrarium in a jar for the fairy to be displayed in!

DIY: Fairy In A Jar (with a free printable fairy)

Supplies Needed

Free printable fairy
• White card stock
• Coloring supplies (watercolors, markers, colored pencils, etc.)
• Glass jar
• Small wood slice (small enough to fit inside the lid of the jar)
• Faux flowers
• Tiny mushrooms
• Moss

Additional tools:
• Scissors
• Glue stick
• Kraft glue
• Hot glue gun

DIY: Fairy In A Jar (with a free printable fairy)

Download the free printable fairy art and print onto white card stock. You’ll notice that there are two different sizes. Choose one to fit your jar (you can also shrink the art down smaller if necessary). Color in the fairy (front and back) with your favorite coloring supplies.

DIY: Fairy In A Jar (with a free printable fairy)

Once you’ve finished coloring, carefully cut out both fairies with scissors and use a glue stick to glue them back-to-back. Choose a faux flower and cut off a few petals into the shape of a skirt. Glue a petal skirt onto the fairy using kraft glue (both front and back sides).

DIY: Fairy In A Jar (with a free printable fairy)

Next plug in your hot glue gun. Once warm, squeeze some hot glue onto the center of the wood slice and place the fairy’s feet into the hot glue. Hold in place until the glue is dry and she can stand up on her own. Add a few tiny mushrooms around her feet.

DIY: Fairy In A Jar (with a free printable fairy)

Place the mounted fairy into the lid of the jar. Add some moss around the edges then place the jar over the fairy and tighten the lid. Optional: hot glue some ribbon around the base of the lid.

DIY: Fairy In A Jar (with a free printable fairy)

If you want her to be secure inside the jar you can hot glue the wood slice base to the inside of the lid. I personally liked being able to take her out and let her explore my garden before returning back to jar for display.

DIY: Fairy In A Jar (with a free printable fairy)
DIY: Fairy In A Jar (with a free printable fairy)

DIY: Patio Friendly Pile-Up Cushions filled with Styrofoam Peanuts

IMG_6027_pileoncushions

The weather was nice for a few days in April, uncharacteristically, and began the countdown to the Pacific Northwest Summer. Ahhh; the handful of blissful weeks that makes you fall in love with the trees again, and wipes the memory of the last 8 gray months.

Safety Husband and I have been trying to be more mindful, and that extends to the way we interact with our home. We are who we are [not catalog people] and we want everything at our house to be conducive to the way we live. (Safety Husband is really into Ham Radio, so he would also like to make a great deal of the house conductive*, but that’s a different story.) We have several outdoor areas that would make great external living spaces, but we haven’t done a great job of outfitting them for the task.

All this to explain why I decided I needed to make a giant pile of outdoor cushions that I could lay upon like the Princess and the Pea. I wanted them to be cheap, washable, refurbishable, and also work with our inside decor. Fabric and wood don’t do well outside over the Seattle winter, and I can’t store things in out non-existent storage space. So I put together a handful of pillow forms from scrap material, filled with recycled styrofoam peanuts; then covered them with painted canvas covers. In one afternoon I had 7 assorted cushions, and dreams of the perfect summer.

SUPPLIES

  • Fabric scissors and optional pinking shears
  • Sewing machine and thread
  • Pillow Form Fabric: approximately 24″ (2/3 yard) of 45″-wide lightweight scrap fabric per pillow
  • Pillow Cover: approximately 24″ (2/3 yard) of 52″ to 60″-wide canvas-type material per pillow
  • Styrofoam Peanuts: about a grocery sack full per pillow. Make sure that you are using styrofoam peanuts instead of the cornstarch ones that melt under water. Imagine the mess!

DECORATING SUPPLIES

  • Tulip Color Shot Fabric Color:  I used Teal, Blue, and Green.
  • Scissors
  • Tape: masking, packing, cello, washi. Whatever you want!
  • Con-Tact Paper: A great option for cutting out larger masks or covering more material.
  • Decorative punches and scissors
  • Compass, or fun shapes to trace

 

Step 1: Making the Pillow Forms

IMG_5863_pileoncushions

Take your scrap pillow-form material and fold it so that the selvedged edges touch. Cut the other two sides with pinking shears so that you have an approximately 23″ square (45″x23″ unfolded.) Sew a 1/2″ seam along the two pinked edges, then do the same for about half of the remaining side.

IMG_5869_pileoncushions

Fill the form about halfway full with peanuts, then sew the opening closed to seal your pillow form.

IMG_5888_pileoncushions

Hire a professional to test the security of your stitching.

IMG_5932_pileoncushions

Repeat until you have run out of material. (I made 7 pillows so that I could make a GIANT PILE.)

Step 2: Making the Pillow Covers

IMG_5891_pileoncushions

There is dirt outside, so you want to make sure that your pillow cover can be easily removed and laundered; this also means you want to pre-wash your fabrics so there is no future shrinkage.

Cut your fabric to about 23″ wide. With the back side showing, fold the width of the fabric into a tube about 22″ wide. The overlapped pieces will make the flap for inserting and removing your pillow form.

IMG_5902_pileoncushions

Stitch up the two open ends of your tube approximately 1/4″ in.

IMG_5904_pileoncushions

Then turn the cover inside out using the open flaps. Make sure to press the corner all the way out with your finger or a pencil.

IMG_5905_pileoncushions

Stitch around the outside edges of your pillow cover, about 3/8″ in- then you’re done!

Step 3: Decorating the Cushions to Match your Life.

IMG_5911_pileoncushions

Decorating the pillows was definitely the biggest fun in this project (other than sitting in the sun on the cushions later.) If you’re a selfless person, you could share that fun with your family and friends, and let each person design a mask for their own pillow. Masking the pillow is as easy as using tape and scissors. Build shapes out of strips of tape, or cut shapes out of contact paper. (ABOVE: I used a compass to draw circles, then cut and arranged them on the front of my cover.) You could have the initials of everyone in your family, silhouettes of your pets and favorite animals… anything really.

IMG_5917_pileoncushions

Once you’ve settled on a masked design, take it outside and spray it down with your fabric spray paint. (I used Tulip Color Shot Fabric Color which is washable and flexible.) Remember that spray paint doesn’t ever go on consistently, so embrace the irregularity and leave some patches lighter than others.

After you’ve got a nice coat of paint on, let your cover dry for an hour or so before pulling off the mask.

IMG_5920_pileoncushions

Then let your covers air out for a few more hours.

When everything is dry (not sticky or smelly) you can put your pillow forms into your covers. Slip the form into the open flap, then push it down under the inner over-lapping flap. Press the corners of the form into the corners of the cover and shake and stomp it until everything looks nice.

IMG_6022_pileoncushions

Then build the tower of pillow on which you will reign.

IMG_6010_pileoncushions

 

IMG_6039_pileoncushions

Or, you know. Share with your friends.

IMG_6032_pileoncushions

Wheeee! Pillows.

IMG_6002_pileoncushionsB

*I have a feeling that SH will have something to say about this line in the post when and if he reads it, so I’m going to put a disclaimer- like all nerdy types, there is typically a method to his madness, so I am sure the most of the house will remain non-conductive, or resistive, or whatever. Just, you know, antennas. He likes antennas.

May DIY Craft Challenge: Once Upon A Fairytale

Thank you to everyone who participated in last month’s DIY Craft Challenge! We just love seeing the awesome things you all make and feel so inspired by the ‘garden’ themed submissions we received. Be sure to check out our roundup post of what everyone made here!

Once Upon A Fairytale…

This month we are diving into a world of magic and make believe! ‘Fairytales’ is the theme for May and we invite you to find inspiration in your favorite storybook. So channel your inner child (and invite the kids in your life to join in) and enter a world of wonder this month. Have tea with the fairies in your backyard, host your own fairytale theme puppet show, or bake a cake that’s fit for a Queen! Wherever this month’s theme takes you, we hope you’ll share your own handmade magic with us!
1605_diychallenge_logo_wideMay DIY Craft Challenge: Once Upon A Fairytale

Inspiration Sources:

1. Emerald City Fairy House by Florence Griswold Museum
2. Finger Puppets by Lia Griffith
3. Storybook Clock by Amanda Patterson
4. Fairy Tea Set by Twig & Toadstool
5. Felt Mushrooms by Lil Fish Studios
6. Clothes Peg Fairies by The Imagination Tree
7. Fairytale Storytelling Game by Let’s Play Music
8. Paper Plate Dragons by Pink Stripey Socks
9. DIY Woodland Acorn Necklace by Flamingo Toes
10. Doily Hot Air Balloons by Joann’s
11. Sandcastle Place Cards by Oh Happy Day!

HOW TO ENTER

Click here for details on how to enter your project to the DIY Challenge! Don’t forget to share your projects with everyone on Instagram using #diycraftchallenge.

The challenge officially begins today, May 1st and ends on May 29th, 2016. We will post a roundup of everyone’s projects on May 31st. Have fun and happy crafting!

Need more inspiration?

Take a look out our Pinterest board for more stitch inspired project ideas.

DIY: Plantable Felt Vegetable Garden (Part 2)

DIY: Plantable Felt Vegetable Garden tutorial (Part 2)
Stitching up felt veggies has become my newest obsession. They’re easy to make, and so much fun to watch kids play with! Yesterday, I shared PART 1 of this tutorial where we made a garden planter box, tomatoes, strawberries and faux plants for them to ‘grow’ on. Today we’ll be making… you guessed it! More veggies for our play garden!

DIY: Plantable Felt Vegetable Garden tutorial (Part 2)

Materials:

• Felt (pinks, purples, greens, and oranges)
• Needle and thread (in coordinating colors)
• Pins and fabric scissors
• Fiberfill
• Pipe cleaners
• Velcro
• Faux greenery (for the ‘plants’)
Free printable pattern

Helpful Links

PART 1 (Tutorials for the planter box, tomatoes, and strawberries)
Felt Cabbage tutorial by Fairfax
Felt Mushroom tutorial by Fairyfox

A special note: There is no right or wrong way to sew any of the felt veggies in this tutorial! You can use a sewing machine, or hand-stitch them all (like I did). My mom and I discovered different ways to make these as we went along and all methods are correct! So if you find your own way, that’s great! And if your tomato turns out a little wonky, even better! Since discovering a ‘real’ odd shape veggie growing in your garden is one of the many pleasures of growing anything.

Step One: Beets!

DIY: Plantable Felt Vegetable Garden tutorial (Part 2)

Print out the pattern provided and cut out your pieces from pink and dark green felt. Thread your needle with pink thread and tie a knot at the end.

DIY: Plantable Felt Vegetable Garden tutorial (Part 2)

Slightly overlap each edge with the one adjacent and whip stitch together (as shown below in photo 1). Repeat on the other three edges until the beet is sewn all the way around (photo 2). Next, use a straight stitch to sew around the outside of the beet (photo 3). Stuff with fiberfill and cinch the opening closed and set aside (we will cinch closed completely, tie a knot and tie off later) (photo 4).

Now to sew the beet’s stalk and leaves! Cut a length of pipe cleaner and thread a needle with green thread (photo 6). Place the pipe cleaner on top of the green stem and then place a pink stalk on top of the pipe cleaner. Holding all three pieces together, whip stitch around the entire pink stock with the pipe cleaner enclosed inside. Trim any excess pipe cleaner from the bottom (photo 7). Repeat this process for the second leaf/stalk.

Now all we have to do is connect the stalk/leaves to the beet. Insert the stalks into the center of the beet and cinch closed (around the stalks). Make a few stitches back and forth and around the stalks to secure the beet and the stalks tightly together (photo 8). Tie off and you’re done!

DIY: Plantable Felt Vegetable Garden tutorial (Part 2)

DIY: Plantable Felt Vegetable Garden tutorial (Part 2)

Step Two: Carrots!

DIY: Plantable Felt Vegetable Garden tutorial (Part 2)

Cut out the pieces using the pattern provided from orange and light green felt. Thread your needle with orange thread and tie a knot at the end (see photo 1 below). Poke your needle into the tip of the orange triangle and pull through (photo 2). Turn the edges together, with them slightly overlapped, whipstitch all the way up to create the shape of a carrot (photo 3). Stuff the carrot with fiberfill (photo 4) and straight stitch around the top. Insert the leaves and cinch the carrot closed. Make a few small stitches around the base of the leaves to secure together and tie off.

DIY: Plantable Felt Vegetable Garden tutorial (Part 2)

felt-vegetable-garden-6

Step Three: Eggplants!

DIY: Plantable Felt Vegetable Garden tutorial (Part 2)
Cut out the pieces using the pattern provided, thread your needle with dark color thread and tie a knot at the end (photo 1). Slightly overlap the edges of two purple felt pieces and whip stitch together up one side. Then add the third piece and whipstitch that on so that all three pieces are now connected (photo 2). Next bring the edges together and sew up the last side to create an eggplant shape (photo 3). Stuff with fiberfill, stitch closed and tie off (photo 4).

DIY: Plantable Felt Vegetable Garden tutorial (Part 2)

Finally, add the leaf. Thread your needle with green thread and backstitch down the center of each ‘petal’ of the leaf to secure onto the eggplant (photo 5). Cut a small piece of velcro (the soft ‘loop’ side) and stitch it anywhere near the top of the leaf. Repeat to make as many eggplants as you like! (I made three to grow on one plant).

Step Four: Make the Plant!

Just like with the strawberries and tomatoes, I used faux greenery to make a plant for the eggplants to ‘grow’ from. Simply cut off a plant size sprig and stitch little pieces of Velcro (using the ‘hook’ or sticky side) onto the leaves and/or stems. Once you’ve finished adding the Velcro, you are ready to plant your eggplants!
DIY: Plantable Felt Vegetable Garden tutorial (Part 2)

DIY: Plantable Felt Vegetable Garden tutorial (Part 2)

DIY: Plantable Felt Vegetable Garden tutorial (Part 2)

DIY: Plantable Felt Vegetable Garden (Part 1)

Plant the seeds of joyful gardening and teach your child how to tend to their very own felt vegetable garden! This is a great project that can be turned into the ultimate garden playtime complete with a garden planter box, plants, and ‘pickable’ fruits and veggies. Also, don’t forget the play watering can!

felt-vegetable-garden-47

My twin nieces will be two years old this June and I plan on gifting them their own felt garden to play with. I first had the idea last winter and had originally planned to make this as a Christmas gift but with the craziness of the holiday season, I wasn’t able to start working on it until Christmas day! Since then, my mom and I have spent many evenings stitching up these felt veggies. Not only are they simple to make and impossible to ‘mess up’ (since imperfections in homegrown veggies is part of the magic of gardening), these felt veggies are also addicting! Once you stitch up a strawberry, you’ll be hooked by its utter cuteness and want to make more!

felt-vegetable-garden-1

Materials:

• Felt (reds and greens)
• Needle and thread (in coordinating colors)
• Pins and fabric scissors
• Fiberfill
• Embroidery floss (green and white)
• Velcro (loop and hook)
• Brown felt (for the ‘dirt’)
• Wooden crate
• Faux greenery (for the ‘plants’)
Free printable pattern

Step One: Make the planter box

felt-vegetable-garden-45

You’ll need a wooden crate, brown felt (or cotton fabric), and fiberfill. I used a sewing machine to sew the pretend dirt but you could also hand-stitch them together. To create the rows of ‘dirt’, you’ll basically be making four mini bolsters that fit snuggly into the crate.

felt-vegetable-garden-diy

Start by cutting two 4 ½” circles (see pattern) and one rectangle 15 1/8” x 11 ¾” in size. Fold the rectangle in half (hamburger style) and sew along the edge leaving approx. 1/2” seem allowance to create a sleeve. Then pin one felt circle to the sleeve with the wrong sides facing out as shown in the photo 2.

Sew all the way around the edge of the circle. Then repeat on the other end, making sure to leave a 2” opening so you can turn the whole thing right side out (see photo 3). Turn right side out and stuff with fiberfill (photo 4). Then hand-stitch the opening closed. Repeat this process to make three more mini bolsters (or however many will fit in your crate).

felt-vegetable-garden-26

A special note: There is no right or wrong way to sew any of the felt veggies in this tutorial! You can use a sewing machine, or hand-stitch them all (like I did). My mom and I discovered different ways to make these as we went along and all methods are correct! So if you find your own way, that’s great! And if your tomato turns out a little wonky, even better! Since discovering a ‘real’ odd shape veggie growing in your garden is one of the many pleasures of growing anything.

Step Two: Tomatoes!

felt-vegetable-garden-53

Print out the pattern provided and cut out your pieces from red and green felt. Thread your needle with red (or pink) thread, and tie a knot at the end (photo 1). Slightly overlap two red pieces and whip stitch them together as shown in photo 2. Then repeat with the other two red pieces. Next, whip stitch the two halves together, leaving a small opening to stuff with fiberfill. Then stitch the opening closed and tie off your thread (photo 3).

tomato-tutorial

Thread a length of green embroidery floss (or green thread works too) and back stitch the leaf to the top of the tomato as shown in photo 4.

Finish up the tomato by adding a stem with a Velcro leaf. Start by threading your needle using green thread and tie a knot at the end (photo 5). Then roll the square end of the stem piece together and stitch closed as shown in photos 6 and 7. Cut a small piece of Velcro (the soft/fuzzy ‘loop’ side) and stitch into the inside of the leaf. You can also trim the length of the stem to your desired length (photo 8).

Lastly, stitch the stem onto the tomato and tie off your thread (photo 9). And that’s it! You’ve made your first tomato! Repeat to make as many as you like (I made three to hang on a single plant).

felt-vegetable-garden-54

Step Three: Strawberries!

felt-vegetable-garden-51

Cut out your pieces using the pattern provided. Then thread your needle with red thread and tie a knot at one end (photo 1). Whip stitch the two red pieces together along the rounded edge only (just like you did with the tomatoes). Then straight stitch around the opening, stuff with fiberfill and pull the threads to cinch the opening closed (photo 2). Tie securely with a knot and tie off.

Next add ‘seeds’ to the strawberry using some white embroidery floss. Start by inserting your threaded needle into the top of the strawberry (the knot will soon be covered up by the top leaf) and make small straight stitches all around the berry (photo 3). When finished, poke the needle back up through the top and tie off. Then, thread your needle with green embroidery floss and sew the leaf onto the top of the berry (making sure to cover the white knots) (photo 4).

strawberry-tutorial

Finally stitch a small piece of Velcro (fuzzy ‘loop’ side) onto the top of the strawberry. And you’re done! Repeat to make as many strawberries as you like! I made 4 berries per plant.

felt-vegetable-garden-21

felt-vegetable-garden-52

Step Four: Make the plants!

I used faux greenery to make plants for the tomatoes and strawberries to ‘grow’ from. Simply cut off a plant size sprig and stitch little pieces of Velcro (using the ‘hook’ or sticky side) onto the leaves and/or stems. Once you’ve finished adding the Velcro, you are ready to plant your berries and tomatoes!

felt-vegetable-garden-27

Additional Links:

Here are links to two great tutorials by Fairy Fox that I used to make both the felt cabbages and mushrooms.

Cabbage tutorial
Felt Mushroom tutorial

felt-vegetable-garden-48

Be sure to stay tuned tomorrow for PART 2 of this tutorial where we’ll be making carrots, beets and even eggplants!

felt-vegetable-garden-57

FEATURED MAKER: Stephanie Rose + “Garden Made” Book Giveaway!

Please welcome our newest Featured Maker: Stephanie Rose! Stephanie is a Master Gardener, author and creative mastermind behind her blog, Garden Therapy. Stephanie and I started working together in the blogging world almost five years ago and I am so excited to learn more about her life and work today. She has also graciously offered us a signed copy of her new book, Garden Made to give away to one lucky winner! See details on how to enter at the end of this post…

stephanie-gardentherapy-a5-1600x0Tell us a little about yourself. Where are you from? What is your background?

I’m a Master Gardener, author and the creator of the crafty-gardening blog, Garden Therapy. I make garden projects in my small, urban Vancouver (Canada) garden to show the world that everyone can get a little garden therapy, no matter what your knowledge, skill, ability, or garden size!

What do you make and sell?

I mostly make crafty garden projects as I love to be out in the garden all year long. I also make all my own natural beauty products and soaps, plenty of handmade gifts, and a bunch of healthy recipes from the garden. I don’t sell the products I make, but instead share the DIY instructions so that everyone can learn to make them too. I have over 700 projects on my blog, Garden Therapy that you can browse through, as well as a print book, Garden Made: A Year of Seasonal Projects to Beautify Your Garden and Your Life, and three eBooks:

What made you decide to take the leap and start your own creative business?

In 2006 I had to stop working at my corporate job due to sudden illness. I was hit hard and suffered from crippling pain for many years. After a few years of being confined to bed, I was able to slowly start moving. I used gardening as a way to heal my body and strengthen my mind. I learned to use gardening, photography, and writing as a way to add joy to each and every day.

How did you get started and when did you launch your business?

I began blogging as a way to reach out to others and ease the isolation. I met plenty of lovely people like me and began to share not just what I was making, but HOW I was making it. When I started to feel like I could begin working again, I decided not to go back to the corporate world, but give blogging and writing a shot as a full-time gig. I’m happy to say that it has worked out better than I had hoped! I’m able to work from home, spend time with my family, and do what I love for a living.

garden-therapy-back-yard-play-garden-tour-21-a5-1280x0

Do you have any philosophies or ideals you try to represent with your work?

I’d like the projects I make to inspire others to try making themselves. While I do really love all the beautiful handmade creations around my home and garden, I love it more when I see that someone has made it for their own home or garden. I know that they are spending their time feeding their creativity and enjoying the garden.

clay-plant-stakes-for-rosemary-a5-1280x0

What’s your process for coming up with ideas for new products?

Generally I have a long list of things I want to make so I gather the materials in my studio and get to them when the time is right. Sometimes that is days, other times it can be years. I may find a birdcage and keep it for 2-3 years before one day turning it into a succulent planter. Or I could see a candle planter at the garden center and rush home to make one that day!

Where do you look for inspiration?

Because I craft from the garden, I look for inspiration on garden tours, garden centers, catalogs, and in parks. I collect materials wherever I go and keep them in my studio until they become something.

What does your workspace/studio look like?

I have a garden full of creative projects and a studio space to store all of my stuff. One day the studio will be set up for more than just storage but until then you can find me out here in my play garden.

Hopscotch Stepping Stones featured in Stephanie's Play Garden

Hopscotch Stepping Stones featured in Stephanie’s Play Garden

What are some of your favorite tools or techniques?

I love to work with outdoor succulents which are colorful and ornamental. I also like to work with lighting in the garden. I’ve made citronella candles out of tin cans, solar lanterns from mason jars, and a little solar chandelier out of a hanging basket.

Tell us about a challenge you’ve overcome in your business? Or something you tried but didn’t work the way you planned?

A few years back I started an Etsy shop to sell some of the things I made and quickly learned that it wasn’t for me. I didn’t like packaging, shipping, and all the non-creative work involved. I enjoyed making the crafts and writing about them so I wrote a number of books to sell instead.

What does a day in the life of Stephanie look like?

About ¼ of my time is gardening & creating, ½ is writing and editing, and ¼ marketing and website housekeeping. I try to spend a little time outdoors or gardening each day to ensure that I continue my recovery and stay healthy.

Visit Stephanie’s blog, Garden Therapy and check out her YouTube Channel!

Thank you so much Stephanie for sharing your story with us! Do you want to be our next Featured Maker? Visit our Contribute Page for more info!


Enter to Win A signed copy of Stephanie’s book!

We are so excited to be giving away a signed copy of Stephanie’s new book, Garden Made: A Year of Seasonal Projects to Beautify Your Garden & Your Life. The giveaway starts today, April 6th and will end on Wednesday, April 13th. We’ll announce the lucky winner on Thursday, April 14th. Just click on the link below to enter. Good luck everyone!

Stephanie's book, Garden Made

Stephanie’s book, Garden Made

CLICK HERE TO ENTER TO WIN!

SHOW+TELL: Hanging Basket Gnome Home

Gardens grow, and so do ideas, so this month is a great time to sit back and realize that some projects keep growing with you, they aren’t just done in one sitting. Some can be done a bit at a time, though, and this fairy garden (AKA Gnome Home) is a great example of a quick project that uses a lot of imagination and a little time.

The inspiration for this garden was a hanging basket that I let wild, which filled up with all sorts of awesome moss. I loved all the textures and colors, and decided that I would express a little whimsy.

IMG_5602_gnomehome

I started collecting bits and baubles from the yard and house. Copper penny steps, a gravel riverbed and a small sparkling glass pond. Piece by piece I placed them into the basket, using a small spoon to pull the moss away as I went.

I put the basket aside for a week, then came back to it when I had time, adding more detail to the door with paint, a button, and some dremel carving.

I also added a swing, because no house is complete without a swing. (My personal motto.)

IMG_5702_gnomehome

All the while I was imagining the little guy who lives in the house, and swings each afternoon- because sometimes it’s fun to let your imagination run wild.

IMG_5699_gnomehome

What’s your most whimsical project?