DIY: Simple Trees for Your Chipboard Forest

IMG_3721_chipboardtrees
Even before I was done building little chipboard houses I knew they would need a little setting to live in. I wanted to come up with a simple and flexible tree template that I could make a whole forest out of. Inspired by my old paper bird project, I used strips of chipboard to build these trees.

IMG_3354_chipboardtrees

Supplies

  • Scrap chipboard: from the backs of notepads or boxes. My pieces were 8.5×11″
  • You favorite paper glue
  • Clothespins or clips
  • Craft knife
  • Scoring Tool: a bone folder or dull knife work great

IMG_3356_chipboardtrees
I began by making two score lines along the long side of the board, at .5″ and at 2.5″.

IMG_3374_chipboardtrees
Then I cut two pieces, 1″ wide, off the other side for the trunk of my tree. The remaining piece of chipboard had my score marks on it, and I trimmed it into 1″ pieces (each piece has the same score marks).

I applied glue to the trunk pieces, and clipped them together to dry.

IMG_3380_chipboardtrees
While the trunk glue was drying, I folded each of my small pieces along the score marks, forming an L.

IMG_3387_chipboardtrees
Piece by piece, I applied glue to the .5″ flap and the top of the L…

IMG_3392_chipboardtrees
then clipped them to the trunk. In this picture you can see that I folded the two pieces of the trunk away from each other at the base; this will allow the trees to sit by themselves.

IMG_3400_chipboardtrees
I continued to add tree pieces until I liked what I saw (typically between 2 and 4 tiers), holding each piece with a couple of clips.

IMG_3405_chipboardtrees
When I was happy, let the glue sit overnight, held by the clips. (Happy little trees, as the man said.)

IMG_3707_chipboardtrees
On some I trimmed the top a bit, some I left tall. I love the way the variety turned out. These would be great with snowy glitter added, or paint. I’m just happy to have a forest for my little chipboard houses.

IMG_3701_chipboardtrees
Trees for the little paper world.

 

Yes, I know I sound crazy. Now go make something!

(;

DIY: Chipboard Village with Free House Template

IMG_3735_chipboardvillage
You might have noticed things have slowed down a little over here at A-I-M. Life goes in cycles, as we know, and unfortunately it’s been tripping us up lately. I’m still making things (some of them more therapeutic than others- like the DIY below), but the timing is tricky, and sometimes things don’t make it online as quickly as they should. We’d like to ask you to be patient with us, and give us time to refresh and collect ourselves. We’ll be back to full speed before you know it.

I’ve been trying to simplify my life because I have accumulated too many “things”; and I’ve made a resolution to truly embrace the making of things, rather than the buying or the keeping. (Our house is getting smaller by the second. Someone’s cursed us, I swear!)

So rather than storing ornaments, sparkles, trees and lights, I’m making new temporary baubles from recycled materials.

With that in mind I sat down to make my version (sweet and simple) of a winter village. I built a template that you can use to start your own winter wonderland, and I hope you’ll get as much peace and joy out of it as I did.

IMG_3286_chipboardvillage

Supplies

  • Scrap Chipboard: I like to save the backs of paper pads for projects like this, or you can grab a food package out of the recycling.
  • Pen and pencil
  • bone folder or scoring device
  • Craft knife
  • Paper glue: Elmer’s works great!
  • The printed template: click here or on the pdf below.

chipboardvillage_template

IMG_3287_chipboardvillage
Chipboard is great because you can mark it simply by pressing down hard on it. To trace the template on my piece, I clipped the paper down, then…

IMG_3300_chipboardvillage
used a bone folder and ruler to score the dotted lines (that will eventually be folded).

IMG_3308_chipboardvillage
Then I traced over the rest of the lines by pressing down firmly with a pen.

IMG_3312_chipboardvillage
Once I finished tracing all the lines I had a faint guide to work with. (If you like, trace the lines lightly with a pencil to help when you’re cutting.)

IMG_3316_chipboardvillage
Like most cutting projects, it’s easier to start by removing the small pieces of the template. In this case that meant cutting out the windows, the notch on the back, and two sides of the door. (Refer to the template to make sure you are cutting only the solid line pieces.)

IMG_3322_chipboardvillage
When I had the building and roof all cut out, I used a bone folder to score the folds a little more deeply. Then I began folding each flap gently away from the score mark. (Including the roof piece.)

IMG_3333_chipboardvillage
When I had the main part of the building folded, I applied glue to the flap (shown in gray on the template sheet) and held the pieces together until the glue held firmly. (You can also use clips or clothespins to hold it closed for a bit.) Once the base of the house was holding firmly, I added glue to the roof flaps (also shown in gray) and aligned and attached the roof. (You will want to hold this together by putting your hand into the house-box and pressing the flaps against the roof.)

IMG_3414_chipboardvillage
To frost the windows, I took a piece of cello tape slightly larger than the window, and attached it to a piece that was even larger. Then I taped that frosted pane right into the window-sash. I left the door bent slightly in, to welcome little chipboard guests!

Now that you’ve got the hang of home-building, you can reuse this template by resizing it, or come up with your own design!

IMG_3347_chipboardvillage
For my second building, I used the natural folds in a cracker box, and drew windows and a door with a pencil before trimming it out. Remember to leave flaps to attach the roof! (But in a pinch, a piece of tape will work as well.) Simply erase the lines, glue everything together, and plop it into your village… and when it gets dark…

IMG_3438_chipboardvillage
slip a few LED Christmas lights under your buildings for ambiance. (The notch I included in the template is super handy for running the wires out the back of the house.) Make sure to use low-heat lights, since they will be surrounded by paper!

IMG_3730_chipboardvillage
If you’re anything like me, you won’t be able to stop at chipboard houses. I really want to add some chipboard critters… These little houses make my imagination run free.

One thing that’s for sure, they need to be surrounded by a forest. Next week I’ll show you a quick and easy way to build your own magic woods.

 

One note: I’m a big fan of letting the materials show in my projects, but remember you can camouflage the materials quickly by adding a little paint (spray or acrylic would work great) or by using it as a base for decoupage or collage (like our shadowbox project). Go crazy!

DIY: Season’s Greetings Printable Herb Packet Gift

Season's Greetings Printable Herb Packet Gift Idea
I recently created this fun holiday printable idea for Garden Therapy and thought I would share it here on A.I.M for you to enjoy! -Rachel

Quick and easy holiday gifts are essential for surviving the holiday season. This free printable “Season’s Greetings” Herb Packet is perfect for small gifts and can easily fit into the mail with your holiday greeting cards! Use herbs harvested from your own garden to create flavorful seasoning mixes paired with a simple and delicious recipe.

CLICK HERE to for the full tutorial and free printable download over at Garden Therapy!

Season's Greetings Printable Herb Packet Gift Idea

DIY: Finger Crochet a Round T-shirt Rag Rug

IMG_2201_roundtshirtrug
Despite my sister’s best efforts I’ve never been able to make sense of real crochet. The “finger crochet” method I describe below is something that came out of a lot of experimentation, but I’m guessing you fiber wizards could whip up something even better! If you’ve done a similar project, or have suggestions to make this DIY more clear, please feel free to tell us about it in the comments below.

When I finished re-weaving my t-shirt rug (updated photos at the bottom of that post) I figured out two important things.

  1. There is better way to cut a t-shirt into strips (fewer, longer strips.)
  2. Once you know how to cut t-shirts into long strips, no t-shirt is safe.

IMG_1957_roundtshirtrug
Which translates to: I had a lot of leftover strips of jersey, and wanted to use them up! I started braiding, tying knots, and eventually settled on a method that can best be described as the frumpy cousin of crochet.

PREP: Cutting one long strip

Knotting small strips of jersey (demonstrated in the woven rug post) is time-consuming, so the longer the strip the better. After digging around a bit I found this video that shows how to turn a loop into one long strip.

IMG_2100_roundtshirtrugI started by cutting the large loop of the shirt from the top, and sliced across from one side, stopping about an inch from the other edge.


Then I slipped the loop over my arms, and starting at the end of one cut I cut diagonally towards the end of the next cut on the other side of the fabric. Then the whole thing unwound in a continuous strip.

MAKING THE RUG


To begin I tied a slip-knot near the end of the string by making a loop, reaching through and grabbing the strip, pulling it though and gently pulling to tighten. (There’s a great demonstration of a slip knot at the beginning of this video.)

IMG_1975_roundtshirtrug
Then I reached through that loop, pinched the strip, and pulled it through to create my first chain stitch. (See steps 2 thru 4 on this Red Heart blog post). This whole project breaks down into pulling a new loop through an old loop.

I repeated this chain stitch about 5 times, then…


tucked the loose string end through the last chain stitch to loosely close the first set of chains into a circle.

IMG_2045_roundtshirtrug
To connect the next ring of chains I pulled the next strip (navy) through two existing loops– the one I just made (pictured here closest to my thumb), and the inside of an earlier chain that lined up with my new one (closer to my fingertip).

IMG_2047_roundtshirtrug
This way my newest loop connected my existing chain to the one inside of it. I then started a pattern of 3 chain stitches, 1 connecting stitch, 3 chain stitches, 1 connecting stitch, 3 chain stitches, 1 connecting stitch, 3 chain stitches, 1 connecting stitch, 3 chain stitches, 1 connecting stitch…

IMG_2070_roundtshirtrug
going around and around the circle.

IMG_2073_roundtshirtrug
When I ran out of strips, I pulled the end of my string through the last loop, and tucked it into the rug– because one day I will have more t-shirts to dismantle, and this rug will keep getting bigger!

IMG_2253_roundtshirtrug_1

TIPS

  • As you are working, make sure not to pull your loops too tight, or stretch your chain when you’re doing a connecting stitch. The looser you work the flatter the rug will sit.
  • Different shirts will make thicker or thinner strings based on the thickness of their fabric. I opted for a very irregular look with lots of inconsistencies in my strips (width ranging from 1″ – 2″) but if you want a more regular look, stick with shirts of a similar weight, and cut your strips about 1.25″ wide.
  • If it’s looking weird, pull out your loops and start over! Once you get the hang of this version of finger crochet you’ll fly through this project, so you will quickly make up the time redoing it. Practice has never been more fun.
  • If you can, work for longish stretches to keep your tension consistent. This is a great “while watching tv or daydreaming” activity.
  • As always, plan to make one more rug than you have cats.

IMG_2196_roundtshirtrug_1

DIY: Paper Spiderwebs to Decorate Everything

Step by step this house is getting properly October spooky. I’m a big fan of decorating with the things I have around, and this collection of tarnished silver and moody ornaments needed one little touch, so I decided to make a spiderweb table runner out of scrap paper and a piece of ribbon.

IMG_1673_paperspiderwebs

SUPPLIES

  • A few sheets of paper, any color you fancy. I used card stock, which was a bit trickier to cut but more durable in the long run.
  • Small clips or tape
  • Your favorite craft knife
  • A hole punch
  • Ribbon
  • The spiderweb templateaim_paperspiderweb

IMG_1682_paperspiderwebs
Once you have printed the spiderweb template, use tape or the clips to secure it to a sheet or two of paper, and cut the spiderweb shape out with a craft knife. You will also punch holes where each X is.

IMG_1693_paperspiderwebs

Cutting Tips

Start trimming the small center pieces out first and move to the large pieces. I actually cut all the inner pieces, then moved on the the next sheet of paper until I have enough pieces. Then I cut the outer shape out of several pieces at once using scissors.

IMG_1701_paperspiderwebs
When you’ve cut out and punched all your pieces, weave a piece of ribbon in and out of the holes to connect several spiderwebs.

IMG_1791_paperspiderwebs
I overlapped the corners of each spiderweb piece to make my table runner…

IMG_1716_paperspiderwebs
and hung them all on one ribbon for a creepy spiderweb banner.

IMG_1735_paperspiderwebs
The possibilities are, as they say, endless! I’m even thinking of creepy spiders to add to them.

The motionless, paper kind.

 

What’re you decorating with?

DIY: Spookily Free and Easy Ghosts

IMG_1479_spookyghosts
When I was a kid my mom came up with all sorts of awesome crafts for us to do, and being a typical goth-in-the-making I loved the halloween crafts most of all. One year we made cheesecloth ghosts with balloons and glue and it’s a project that has haunted me to this day.

I decided that I really wanted some ghost friends, but lacking balloons and cheesecloth I decided to make some up, Alison style. (IE: Free, Quick, and Fun.)

IMG_1396_spookyghosts

SUPPLIES

  • At least a couple of feet of sheer or thin fabric – old sheets or window sheers work great!
  • All-purpose flour
  • Bottles: Soda, water, or wine. Glass or plastic.
  • Wire or wire coat hangers
  • Plastic bags
  • Rubber bands
  • Scissors
  • A bucket or bin to mix your flour paste in

Step 1: The Form

IMG_1417_spookyghosts
To begin will make a simple armature out of wire (or out of a wire hanger). Cut a piece about 24″ long, and twist it together to form one big loop.

IMG_1426_spookyghosts
Slip the loop over the neck of your bottle, and twist the arms slightly so that they sit securely on the bottle and point slightly upwards. Using a scrap piece of fabric or paper, form a ball shaped head over the neck of the bottle and secure it with a rubber band.

IMG_1440_spookyghosts
To make the armature (form of the ghost) easier to remove, cover it with a plastic grocery bag, and secure it with a rubber band.

Measure the height of your ghost form from the base, across the head, and to the base on the back side. Cut a square of fabric this size to cover your form. (This is a great time to tear your fabric instead of cutting, if you want. Frayed edges are a bonus!)

 

Step 2: Stiffening and Forming the Fabric

IMG_1447_spookyghosts
Although flour may not last forever when used as a paste, it works perfectly for a ghost that will only haunt your house for a year or two. Combine 4 parts water with 1 part all-purpose flour in a large container and mix well with your fingers. Soak your ghost fabric, and wring it gently.

IMG_1448_spookyghosts
Spread the fabric over the ghost form, with a corner of the fabric pointing forwards.

IMG_1450_spookyghosts
Using your creativity (and maybe a clip or two) shape the cloth as creepily as you want! (I loved adding a fold along the “hair line” so that it looked like my ghost was in a cloak.)

IMG_1456_spookyghosts
If you’d like, remove some of the excess fabric from the “arms” of your ghost. (Make sure to leave fabric puddled at the front and back; this will ensure that your ghost will sit up when it’s all dry.)

Leave your new little friend to dry overnight, with a fan blowing if you can. When it’s completely dry, gently pull the bottle form out of the stiff fabric. (If it’s not firm enough to stand, you can mix up some more of the flour and water and paint it onto your fabric while it’s still on the form. You may want to use a higher ratio of flour to water.)

IMG_1477_spookyghosts
Boo!

IMG_1485_spookyghosts

IMG_1505_spookyghosts
If you’re feeling extra crafty, you can paint right on your ghosts with watercolor or acrylic paints. I have some scary plans for one of mine.

IMG_1482_spookyghosts

Use What You’ve Got!

If you don’t have scraps of fabric lying around, this project is also fun with thin paper, tissue paper, or even paper towels. Just make one adjustment: instead of soaking the paper in your paste, lay the paper across your form and paint the paste on with your fingers or a craft paint brush. Saturate the paper slowly and let it fall again the form. You can add multiple layers of paper for more texture (like the tissue paper ghost above) and even cut out a mouth and eyes!

Stick an LED “candle” in it, and things get even creepier!

IMG_1626_spookyghosts
Scary Ghost Sound!

What’s frightening you this season?

DIY: Glitter Pumpkin Candles

DIY: Glitter Pumpkin Candles  #autumn #fallcrafts

Fall is my absolute favorite time of year to make things. There’s something about the crisp autumn breeze that makes me want to spend an afternoon with a hot cup of tea and a craft project. I’ve been collecting small pumpkins for the past few weeks and drawing inspiration from this post by Hello Natural, I decided to make my own pumpkin candles.

DIY: Glitter Pumpkin Candles  #autumn #fallcrafts

Supplies Needed

• Small pumpkins
• Soy wax flakes
• #2 candle wick
• Wick tabs
• 30 drops clove essential oil (optional)
• Glitter

Additional Tools

• Carving knife
• Spoon
• Pliers
• Tin can (or double boiler)
• Popsicle stick
• Clothes pins
• Scissors

Cut the top off of each pumpkin and use a spoon to scrape out the insides.

DIY: Glitter Pumpkin Candles  #autumn #fallcrafts

Prep your wick with metal tabs (alternatively you could also use pre-tabbed wicks). Cut the wick to size and insert it through the metal tab with the end of of the wick lining up to the bottom of the tab. Use pliers to pinch the metal tab tightly around the wick. Place into the center of each pumpkin. Use a clothespin to hold the wick into place.

DIY: Glitter Pumpkin Candles  #autumn #fallcrafts

Using a double broiler, melt soy wax flakes over medium heat. Use a popsicle stick to stir the wax. Once completely melted, add the essential oil (optional).

DIY: Glitter Pumpkin Candles  #autumn #fallcrafts

Pour melted wax into the prepared pumpkins. Allow wax to dry almost completely, then sprinkle glitter over the top. Use a hairdryer to ‘hot top’ the glittered wax. The wax should remelt slightly and allow the glitter to set on the top. Allow to dry completely and trim wicks.

DIY: Glitter Pumpkin Candles  #autumn #fallcrafts

Simple as that! Now you can light them up and enjoy a hot cup of pumpkin spice.

DIY: Glitter Pumpkin Candles  #autumn #fallcrafts

DIY: Turmeric Tie-Dye Scarf

DIY: Turmeric Tie-Dye Scarf #natural #dye #tiedye

Tie-dye has been a favorite hobby of mine since I was a kid. I remember first learning to tie-dye as a girl scout at summer camp and it’s what initially inspired my former handmade business, Camp Smartypants back in 2009. While I still love to wear tie-dye today, it’s been years since I’ve dug out my supplies and tie-dyed something new.

DIY: Turmeric Tie-Dye Scarf #natural #dye #tiedye

For my newest hobby (I have many), I’ve taken up the study of herbs and creating my own Materia Medica. When choosing which herb to research next, I settled on Turmeric for it’s amazing orange color (perfect for the fall season). Turmeric is used in Indian and Asian cuisine, it has amazing medicinal properties, and is also used as a natural dye for both food and textiles.

Turmeric is one of my favorite spices (I turn to it often to help ease pain and inflammation) and I was excited to be able to get crafty with it and dye a new scarf to wear this fall season. Of course, I couldn’t resist tying up the fabric before tossing it into the prepared dye, making for a vibrant, natural tie-dye.

DIY: Turmeric Tie-Dye Scarf #natural #dye #tiedye

Supplies Needed

• Turmeric powder (about 1/2 cup)
• White vinegar
• *White natural fiber scarf (like cotton or silk)

Additional Tools

• Large pot
• Rubber gloves
• Waxed thread (I used Flat Sinew)

*I used a white jersey scarf from American Apparel

DIY: Turmeric Tie-Dye Scarf #natural #dye #tiedye

Instructions

First things first, wash and dry your fabric to release any starch that might still be in the fibers. Then simmer fabric in a large pot with a water/vinegar solution for one hour (use 4 parts water to 1 part vinegar). This process creates a fixative for the turmeric dye.

DIY: Turmeric Tie-Dye Scarf #natural #dye #tiedye

Rinse and ring out your fabric under cold water until it no longer smells of vinegar and set aside. Fill the pot with fresh water again (using enough water to cover your fabric) and bring to a simmer. Add the turmeric powder (I used about 1/2 cup of turmeric, but you can use more or less depending on whether you want a dark or light color) and stir until dissolved. Let simmer for about 10 minutes.

DIY: Turmeric Tie-Dye Scarf #natural #dye #tiedye

While the turmeric dye is simmering, tie up your scarf any way you’d like. I like to use flat sinew (a waxed thread) for tie-dye but you can use rubber bands or regular string as well.

DIY: Turmeric Tie-Dye Scarf #natural #dye #tiedye

Submerge the tied fabric into the dye bath and simmer for 15 minutes. Stir the fabric every once in a while to make sure it’s completely soaked in the dye and to prevent the fabric from burning. After 15 minutes, turn off the heat and let the fabric sit in the dye bath for as long as you want. I wanted my scarf to be as dark yellow/orange as possible so I left it in the dye bath for a full 24 hours.

DIY: Turmeric Tie-Dye Scarf #natural #dye #tiedye

Once the fabric is approximately two shades darker than your desired color, remove it from the dye bath and rinse under cold water to remove the excess dye. Cut off your string or remove your rubber bands and continue squeezing and rinsing until the water runs clear again. Place rinsed fabric in the dryer or hang dry.

DIY: Turmeric Tie-Dye Scarf #natural #dye #tiedye

What a fun project! I am so happy with the results and am loving the pungent turmeric aroma that filled my kitchen over the weekend.

I used this post by Itty Bitty Impact as a guide for this project.

Three DIY Projects To Try This Fall

1. Black Cat Stamped Scarf

Carve your own cat stamp and make this purrfectly cute scarf to keep you warm on the brisk autumn days ahead. [Click here for the full tutorial]

DIY Cat Stamped Scarf #craft #kitty #blackcat #fashion #fall

2. Mini Pumpkin Macrame Hanger

Add some unique pumpkin decor to your home with this simple DIY. [Click here for the full tutorial]

DIY: Mini Pumpkin Macrame Holder

3. Felt Sugar Skull Sachets

Watch your favorite fall movie and practice your embroidery stitches to make some felt sugar skulls. [Click here for the full tutorial]

DIY: Felt Sugar Skull Sachets #dayofthedead #diadelosmuertos #embroidery

Hope you all have a wonderful and crafty weekend!

DIY: Build a Box and Lid

IMG_1006_buildabox
I love putting my creative instincts to good use in a 3d world, and that means I get a kick out of building boxes. There’s something magical about turning a little chipboard or cardboard and a little tape into a functional container, and it seems like I have plenty of opportunities to do just that.

The basics of building a box with a lid (which I call a hatbox) are very basic indeed. I drew up a little sample sheet with the very simplest version. Use cardboard or chipboard, scissors or a craft knife, and your favorite tape.


My challenge today was building a gift box for a set of wine glasses. (Recognize the etching process?)

IMG_0849_buildabox
I measured the length, depth, and height of the set, and got my favorite materials out.IMG_0916_buildabox

SUPPLIES

  • Chipboard Pieces
  • Gummed Paper Tape – I like working with this kind of tape when I’m using chipboard or cardboard. It starts out un-tacky, and when you wet it with a sponge it is like you poured a whole bunch of glue on it. It can be kind of messy, but you can shift it around until it dries, making it very forgiving.
  • Craft Knife
  • Scissors
  • Ruler

IMG_0949_buildabox
First I cut the 5 pieces for the bottom of the box, and pieces of tape for each seam.

IMG_0955_buildabox
Since I knew some of the tape would show on the final box, I made sure to cut an angle on any piece of tape that overlapped another piece- especially on corners.

IMG_0970_buildabox
To place the tape correctly on the board, I first laid the board out perfectly on my mat. I left a board’s width between each piece to allow for them to fold.

IMG_0975_buildabox
I used a wet rag moisten each piece where I needed it, then attached the tape pieces to my boards.

IMG_0979_buildabox

I’ve outlined my tape pieces here. The first pieces I placed were the a’s, then I moved on to b, then c.

IMG_0981_buildabox
I flipped the whole thing over, and started folding up and taping the sides (applying more water to keep the tape sticky and smoothing out any bubbles.)

IMG_0982_buildabox

IMG_0945_buildabox
With the bottom portion of the box completed, I measured the outside of the completed box and added about 1/8 of an inch to allow the lid to close easily. I chose 5″ at the height of the lid, and built another box like the first, using those dimensions.

IMG_0986_buildabox
I’m a big fan of a simple kraft colored box, but since this was a gift, I wanted to add a little pizazz. I printed a design on card stock, and cut it down to fit each side of the box lid. I used spray mount to adhere it to the box.

IMG_0992_buildabox
Then added a little ribbon, a card…
< a href=”http://adventures-in-making.com/wp-content/uploads/2015/09/IMG_0993_buildabox.jpg”>IMG_0993_buildabox
and a divider inside to kept the glasses from clanking.

IMG_1006_buildabox
I’m super happy with the way this box turned out– a perfect fit for gifting and storing the glasses.

IMG_1011_buildabox
I hope you can build off the simple instruction sheet to create the perfect home for your treasures, and of course some treasures for your home.