DIY: Quick Printable Catnip Kicking Bag

img_6911kickingbag
This month’s DIY Challenge theme is Cats, so send in all your favorite kitty projects for the round-up at the end of the month. Visit the challenge page for more information, and use the handy-dandy form to upload your project photos. We can’t wait to see what you’ve made! Quick note to those of you who tend more to the barking or chirping animals – we welcome protest projects too. Show us why your favorite is better than our purring friends!

In typical cat fashion, my kitties seem to like toys that are not intended to be toys at all. You might think it’s a child-safe plug cover, but they think it’s the neatest thing since canned tuna. For a while they have been sharing a repurposed jack-o-lantern drawstring bag filled with catnip- and I decided it was time to give them something a little nicer. They do love the scale of the jack-o-lantern bag, which is long and wide unlike most catnip toys, so I decided to replicate the scale with a super-simple catnip kicking bag.

I wanted to customize the bags a bit, and I kept thinking about the lovely art Tara Bliven shared with us last month. I asked if she would write up a few feline words for us, and she did! You can use the free printable below to make this cat toy even cattier!

img_6743kickingbag

Supplies for two Bags

adventuresinmaking_kickingbagthb

Download and print out the Cat Fabric according to the specifications on the package.

img_6746kickingbag

Cut the fabric in half to make a sheet 10″ x 3.75″. Peel the backing paper off the fabric and stack it on top of the two pieces of thick fabric- with “right sides” facing out.

img_6748kickingbag

Stitch, 1/2″ in, around three sides and leave the fourth open.

img_6750kickingbag

Pour at least a teaspoon of dried catnip in the middle of your pocket…

img_6756kickingbag

Close the last side of the bag, and trim around it with pinking shears to limit fraying (and add character.)

img_6757kickingbag

Repeat with the second set of materials, and you’re done! A super cute sewing project that’s quick enough that you won’t mind when your kitties shed all over it. Now for the fun part…

(Warning, you are about to be bombarded with too many pictures of my kitties.)

img_6765kickingbag

img_6780kickingbag

img_6806kickingbag

The dangers of catnip trips. Very unflattering photos.

 

img_6871kickingbag

img_6889kickingbag

img_6863kickingbag

img_6908kickingbag

Success.

A couple of notes

  • The printable fabric is quite thin and I didn’t trust it to contain the catnip for very long, so I used it as an outside layer only. The catnip itself is contained within two layers of thicker fabric.
  • If you’re feeling adventurous, try this tutorial to make your own printable fabric!
  • If you are worried about your print running, try this vinegar bath solution to set your ink.
  • Tara is a wizard at decorative writing (and many other arts). Visit her website tarabliven.com  to find out how you can bring more of her awesomeness into your life.

DIY: Add a Kitten Pocket with Polish Remover and Sharpies

img_6722kittenpocket

This month’s DIY Challenge theme is Cats, so send in all your favorite kitty projects for the round-up at the end of the month. Visit the challenge page for more information, and use the handy-dandy form to upload your project photos. We can’t wait to see what you’ve made!

I like to “joke” that I have a kitten biological clock. Every couple of years I start thinking about how much fun kittens are, and how cute, and how nice it would be to have the pitter patter of little feet.

Dangerous.

To nip this in the bud this year, I’ve signed up for some future fostering, and came up with this little kitten pocket to bridge the gap. It’s based on a picture of Wee Cooper (our last kitten) and I thought I would share it so you can all have a kitten pocket of your very own.

img_6609kittenpocket

Supplies

  • Cotton Tote that kneads needs a kitten. It’s important to use cotton or another natural material because acetone can eat through a lot of synthetic materials.
  • 100% Acetone finger nail polish remover.
  • Cotton pads, balls, or rags.
  • Bone folder or similar tool for burnishing
  • Masking Tape
  • Sharpie Markers – Black and Silver
  • This kitten template* printed with a laser printer or copier. Use the reversed image on the right for transferring.

Step One: Printing and Prepping Your Template

Use a Laser Printer or Copier to print the Kitten Template* on a normal sheet of paper. Black and white is fine. It’s important to use a printer or copier that has TONER instead of ink. The transfer process with move some of that toner onto the fabric. If you try it with ink you’ll end up with a mess!

If you don’t have access to a toner-based printer or copier, or this process doesn’t work for some other reason, never fear! You can use a light table to trace the kitten on your bag, or use transfer paper to apply the design. You can see examples of those processes here and here.

After you have printed your page, cut out the cat and pocket on the right, leaving a large border.

img_6612kittenpocketb

Step Two: Layout Your Design

Decide where you want to put your kitten, and tape it firmly face down on your bag. Make sure everything is as straight and tight as you can make it.

img_6617kittenpocketb

Step Three: Blot and Burnish

Saturate a cotton pad with acetone, and press it into the paper. You will start to see the design through the paper. Saturate a small portion of the design with acetone, then switch to burnishing with your bone folder. Rub the side of the bone folder on the paper to press it firmly down into the fabric. Repeat on small sections of the design, then go back over each portion one or two times, adding more acetone and pressure.

img_6620kittenpocketb

If you can, peak to make sure that you have transferred the kitten. If not, you may want to repeat the process with more acetone and more pressure. If you see the design, move to the next step!

If you don’t see anything at all, there’s a chance your printer won’t work for this process. Don’t fear! You can use a light table to trace the kitten on your bag, or use transfer paper to apply the design. You can see examples of those processes here and here.

img_6623kittenpocketb

Step Four: Fill it in

If you used a smooth material and have a good transfer you could skip this step altogether– it’s up to you. If you’d like, use a black Sharpie to darken in the design. You can use the left side of the template as a reference for portions you can’t see as well on the transfer.

img_6626kittenpocketb

When you have the kitten filled in, use a silver Sharpie to add in the whiskers. It will show up on the black of the kitten and on the light bag as well!

img_6658kittenpocket

When you’re done let it dry for a couple of minutes, pile all your stuff in it, and take a kitten everywhere you go.

img_6713kittenpocket

Purrfect.

 

 

 

*Kitten template includes an original illustration by Alison Lang. We’re happy to share files for personal and educational purposes, but please don’t use it for anything else without our permission. Thanks!

AUGUST DIY Challenge Roundup

ROUNDUP_rainbow-exercise2

We snuck back with a rainbow inspired DIY Craft Challenge this month, and it looks like you’re all as busy as we are! We got one VERY awesome Rainbow submission from Tara Bliven using our new submission form.

Tara used a brush and colorful gouache on butcher paper as a writing warm-up.

tara_rainbow-exercise

Been doing a lot of cooking, so I used flavor-y words. – Tara

We love them, Tara!

Here’s a little more rainbow inspiration from our archives to brighten your day!

DIY: Rolled Paper Gift Basket

rainbow-treats-4

RECIPE: Rainbow Bars

DIY: Tie-Dye Tissue Paper

DIY: Tie-Dye Tissue Paper

DIY: Crayon Candles

DIY: Crayon Candles

DIY: Crayons + Free Printable Coloring Book!

DIY: Crayons + Free Printable Coloring Book!

DIY: Rainbow Shamrock Brooch

DIY: Rainbow Shamrock Brooch

 

 

 


We’re excited to announce that next month’s theme is close to our hearts… Keep an eye on the Adventures-in-Making blog and Facebook for a some purrrfect projects, and send your cat inspired work to us to be included in our roundup at the end of the month.

DIY: Recycled Rainbow Mobile

1608_diychallenge_logo_wide

This month’s DIY Challenge theme is Rainbows, so send in all your favorite rainbow projects for the round-up at the end of the month. Visit the challenge page for more information, and use the handy-dandy form to upload your project photos. We can’t wait to see what you’ve made!

IMG_6311_rainbowmobile

Rainbows are amazing. They’re awe inspiring in the sky, they are a great way to organize things*, and they are just plain magical.

This little recycled rainbow mobile tries to be a few of those things- and has the added bonus of being a nifty reason to doodle.

IMG_6152_rainbowmobile

SUPPLIES

IMG_6164_rainbowmobile

Use the thick material punch to cut circles out of every piece of plastic you can find. Don’t worry, the idea of using recycleables for art will make you look insane. Embrace it. (;

IMG_6179_rainbowmobile

Use your rainbow of markers to doodle decorations on each circle. It’s okay if you have an uneven amount of some color because you think orange is terrible, just have fun!

IMG_6185_rainbowmobile

Tie three strings to your top ring, and tie those three together to hang the ring parallel to the ground. Find a place to hang this ring while you work.

IMG_6425_rainbowmobile

Choose one of your most popular colors (purple for me), and poke a small hole near the top of each piece with a safety pin. Cut a piece of thread approximately 12″ long, and string it through one of the holes. Tie the ends of the thread together, and attach it to the hanging ring using a lark’s head knot. Repeat this for each circle of this color.

IMG_6197_rainbowmobile

Choose the next color in the rainbow (blue in my case) and poke each piece like you did before. This time add two inches to your thread for a length of 14″. Attach each of these pieces to your ring.

IMG_6202_rainbowmobile

Continue by adding 2 inches to the length of each new color until you have tied all of your pieces to the ring.

IMG_6213_rainbowmobile

When you have finished, hang it in a bright window and watch it sway and catch the light.

IMG_6227_rainbowmobile

IMG_6317_rainbowmobile

See, sometimes trash-art is fun!

 

*I may or may not be one of those people who sorts books by color. My librarian mother may be driven insane by this fact.

DIY: Watercolor & Wax Paper Jewelry

IMG_6410_waxedpaperjewelry

Sometimes I come up with a project that I enjoy so much that it’s hard to stop to write a post. This, my friends, is one of those.

It’s a simple combination of watercolor, melting wax, and punching shapes- but it’s oh so satisfying.

 

SUPPLIES

  • Thick paper for Watercolor
  • Watercolor paints and brushes
  • Pencil
  • Straight Edge
  • Paraffin Wax
  • Scraping Tool, like a vegetable peeler.
  • Iron, ironing board, towel or other surface to catch wiley bits of wax
  • Parchment Paper
  • Scissors
  • Large Thick Material Punches (optional but recommended) I used circle punches in 2″ diameter, 1.5″ diameter, and 1″ diameter
  • Small hole punch
  • Thin cord or ribbon
  • Jump Rings (optional)

Step One: Paint it

IMG_6321_waxedpaperjewelry

Gather your paper, pencil, straight edge, paints and brushes.

IMG_6325_waxedpaperjewelry

Draw several parallel lines with your pencil to create stripes of varying widths.

Begin filling in each stripe with a color in the order of the rainbow. (ROY G BIV –  Red Orange Yellow Green Blue Indigo Violet).

If you fill a small stripe, use a similar color next to it (Orange red and Red for instance.) It’s okay if your paint is a little irregular, or you have small white spaces.

IMG_6341_waxedpaperjewelry

Now it’s time to paint the back of your pendant. Draw some non-parallel lines on a new piece of paper, and fill them in with some of the same colors you used on the other side. Leave a little white space as well. Set your paintings aside to dry.

Step Two: Wax it

IMG_6344_waxedpaperjewelry

Now you will need your ironing setup, parchment paper, and wax. You might have a little wax escape during the ironing process, so it’s a good idea to have a scrap towel or cotton fabric to protect your ironing board. Remember to keep an eye on your ironing so you don’t singe anything!

IMG_6345_waxedpaperjewelry

Sandwich one of your dry watercolor sheets inside a piece of parchment paper. Shred a pile of wax on top. (You can always add more wax, so this is a good time to play!)

IMG_6347_waxedpaperjewelry

Turn your iron to it’s lowest setting, and gently melt the wax between the sheets of parchment paper. You will see the paper start to look wet. Continue working the liquid wax into the paper until it starts to be consistently translucent. You may want to add more wax.

IMG_6349_waxedpaperjewelry

Flip your paper over, and add a pile of wax to the other side. This will be the “glue” that holds your two sides together.

IMG_6350_waxedpaperjewelry

Lay the other piece of paper on top of that pile…

IMG_6352_waxedpaperjewelry

shred some more wax on that, and iron again following the earlier instructions.

IMG_6355_waxedpaperjewelry

Continue to add wax until the papers are translucent and consistently wet looking. When you’re happy with the look, put a little bit of weight on the stack, and let it cool for a couple of minutes.

IMG_6356_waxedpaperjewelryWhen it is still warm, but safe to touch, uncover the paper, and use your finger or a tool to smooth any puddles of wax. (Playing in wax is one of my favorite things!) Now let it cool completely (a few minutes.)

Step Three: Punch it

IMG_6359_waxedpaperjewelry

I am loving these thick material punches from Fiskars. I have long abused normal paper punches, and they have a habit of breaking at the worst possible moment. These punches go through everything like butter.

IMG_6361_waxedpaperjewelryUse a punch (or scissors) to take shapes out of your waxed paper…

IMG_6365_waxedpaperjewelry

until you have a nice little pile of shapes to work with. To turn solid shapes into pendants, punch small holes on one or two sides. You can run cord through these holes (or attach jump rings.)

IMG_6368_waxedpaperjewelry

After you have everything cut out, polish the shapes by using your fingers to rub excess wax off the surface and edges.

IMG_6404_waxedpaperjewelry

Feed thin ribbon, cord, or chain through the holes in your pendants. You can feed your cord through, wrap it several times, or tie a lark’s head knot. Anything goes! Leave enough room to slip the necklace over your head, and you’re set.

IMG_6395_waxedpaperjewelry

Double sided rainbow pendants!

Now I want to wax all the paper. Someone stop me before I go too far!

DIY: Fairy In A Jar (with a free printable fairy!)

I have been fascinated by the whimsical mystery of the fairy folk since I was a little girl. I remember looking for them while playing outside and making up tiny little fairy houses using sticks, leaves and flowers I would collect in my own backyard. This project is a fun activity to do with your kids. Download the free printable fairy art and let them color their fairy. Then help them create a little terrarium in a jar for the fairy to be displayed in!

DIY: Fairy In A Jar (with a free printable fairy)

Supplies Needed

Free printable fairy
• White card stock
• Coloring supplies (watercolors, markers, colored pencils, etc.)
• Glass jar
• Small wood slice (small enough to fit inside the lid of the jar)
• Faux flowers
• Tiny mushrooms
• Moss

Additional tools:
• Scissors
• Glue stick
• Kraft glue
• Hot glue gun

DIY: Fairy In A Jar (with a free printable fairy)

Download the free printable fairy art and print onto white card stock. You’ll notice that there are two different sizes. Choose one to fit your jar (you can also shrink the art down smaller if necessary). Color in the fairy (front and back) with your favorite coloring supplies.

DIY: Fairy In A Jar (with a free printable fairy)

Once you’ve finished coloring, carefully cut out both fairies with scissors and use a glue stick to glue them back-to-back. Choose a faux flower and cut off a few petals into the shape of a skirt. Glue a petal skirt onto the fairy using kraft glue (both front and back sides).

DIY: Fairy In A Jar (with a free printable fairy)

Next plug in your hot glue gun. Once warm, squeeze some hot glue onto the center of the wood slice and place the fairy’s feet into the hot glue. Hold in place until the glue is dry and she can stand up on her own. Add a few tiny mushrooms around her feet.

DIY: Fairy In A Jar (with a free printable fairy)

Place the mounted fairy into the lid of the jar. Add some moss around the edges then place the jar over the fairy and tighten the lid. Optional: hot glue some ribbon around the base of the lid.

DIY: Fairy In A Jar (with a free printable fairy)

If you want her to be secure inside the jar you can hot glue the wood slice base to the inside of the lid. I personally liked being able to take her out and let her explore my garden before returning back to jar for display.

DIY: Fairy In A Jar (with a free printable fairy)
DIY: Fairy In A Jar (with a free printable fairy)

DIY: Patio Friendly Pile-Up Cushions filled with Styrofoam Peanuts

IMG_6027_pileoncushions

The weather was nice for a few days in April, uncharacteristically, and began the countdown to the Pacific Northwest Summer. Ahhh; the handful of blissful weeks that makes you fall in love with the trees again, and wipes the memory of the last 8 gray months.

Safety Husband and I have been trying to be more mindful, and that extends to the way we interact with our home. We are who we are [not catalog people] and we want everything at our house to be conducive to the way we live. (Safety Husband is really into Ham Radio, so he would also like to make a great deal of the house conductive*, but that’s a different story.) We have several outdoor areas that would make great external living spaces, but we haven’t done a great job of outfitting them for the task.

All this to explain why I decided I needed to make a giant pile of outdoor cushions that I could lay upon like the Princess and the Pea. I wanted them to be cheap, washable, refurbishable, and also work with our inside decor. Fabric and wood don’t do well outside over the Seattle winter, and I can’t store things in out non-existent storage space. So I put together a handful of pillow forms from scrap material, filled with recycled styrofoam peanuts; then covered them with painted canvas covers. In one afternoon I had 7 assorted cushions, and dreams of the perfect summer.

SUPPLIES

  • Fabric scissors and optional pinking shears
  • Sewing machine and thread
  • Pillow Form Fabric: approximately 24″ (2/3 yard) of 45″-wide lightweight scrap fabric per pillow
  • Pillow Cover: approximately 24″ (2/3 yard) of 52″ to 60″-wide canvas-type material per pillow
  • Styrofoam Peanuts: about a grocery sack full per pillow. Make sure that you are using styrofoam peanuts instead of the cornstarch ones that melt under water. Imagine the mess!

DECORATING SUPPLIES

  • Tulip Color Shot Fabric Color:  I used Teal, Blue, and Green.
  • Scissors
  • Tape: masking, packing, cello, washi. Whatever you want!
  • Con-Tact Paper: A great option for cutting out larger masks or covering more material.
  • Decorative punches and scissors
  • Compass, or fun shapes to trace

 

Step 1: Making the Pillow Forms

IMG_5863_pileoncushions

Take your scrap pillow-form material and fold it so that the selvedged edges touch. Cut the other two sides with pinking shears so that you have an approximately 23″ square (45″x23″ unfolded.) Sew a 1/2″ seam along the two pinked edges, then do the same for about half of the remaining side.

IMG_5869_pileoncushions

Fill the form about halfway full with peanuts, then sew the opening closed to seal your pillow form.

IMG_5888_pileoncushions

Hire a professional to test the security of your stitching.

IMG_5932_pileoncushions

Repeat until you have run out of material. (I made 7 pillows so that I could make a GIANT PILE.)

Step 2: Making the Pillow Covers

IMG_5891_pileoncushions

There is dirt outside, so you want to make sure that your pillow cover can be easily removed and laundered; this also means you want to pre-wash your fabrics so there is no future shrinkage.

Cut your fabric to about 23″ wide. With the back side showing, fold the width of the fabric into a tube about 22″ wide. The overlapped pieces will make the flap for inserting and removing your pillow form.

IMG_5902_pileoncushions

Stitch up the two open ends of your tube approximately 1/4″ in.

IMG_5904_pileoncushions

Then turn the cover inside out using the open flaps. Make sure to press the corner all the way out with your finger or a pencil.

IMG_5905_pileoncushions

Stitch around the outside edges of your pillow cover, about 3/8″ in- then you’re done!

Step 3: Decorating the Cushions to Match your Life.

IMG_5911_pileoncushions

Decorating the pillows was definitely the biggest fun in this project (other than sitting in the sun on the cushions later.) If you’re a selfless person, you could share that fun with your family and friends, and let each person design a mask for their own pillow. Masking the pillow is as easy as using tape and scissors. Build shapes out of strips of tape, or cut shapes out of contact paper. (ABOVE: I used a compass to draw circles, then cut and arranged them on the front of my cover.) You could have the initials of everyone in your family, silhouettes of your pets and favorite animals… anything really.

IMG_5917_pileoncushions

Once you’ve settled on a masked design, take it outside and spray it down with your fabric spray paint. (I used Tulip Color Shot Fabric Color which is washable and flexible.) Remember that spray paint doesn’t ever go on consistently, so embrace the irregularity and leave some patches lighter than others.

After you’ve got a nice coat of paint on, let your cover dry for an hour or so before pulling off the mask.

IMG_5920_pileoncushions

Then let your covers air out for a few more hours.

When everything is dry (not sticky or smelly) you can put your pillow forms into your covers. Slip the form into the open flap, then push it down under the inner over-lapping flap. Press the corners of the form into the corners of the cover and shake and stomp it until everything looks nice.

IMG_6022_pileoncushions

Then build the tower of pillow on which you will reign.

IMG_6010_pileoncushions

 

IMG_6039_pileoncushions

Or, you know. Share with your friends.

IMG_6032_pileoncushions

Wheeee! Pillows.

IMG_6002_pileoncushionsB

*I have a feeling that SH will have something to say about this line in the post when and if he reads it, so I’m going to put a disclaimer- like all nerdy types, there is typically a method to his madness, so I am sure the most of the house will remain non-conductive, or resistive, or whatever. Just, you know, antennas. He likes antennas.

RECIPE: Pansy Shortbread Cookies

flower-cookies-7

Do you believe in magic? Ever since I was a little girl, I’ve loved reading stories of the fairy folk living in an enchanted forest, playing with the animals, and sipping tea from rosebud tea cups. If I were ever invited to join them, I’d bring these Pansy Shortbread Cookies to share.

Inspired by the wonders of nature and the magic that can be found within it, I decided to make a batch of cookies fit for fairyland. This recipe is simple to make and so pretty! Make it your own (or please the fairies in your own backyard) by changing up the ingredients to suite your favorite flavors. I chose to make a lavender lemon shortbread cookie using lavender-infused sugar and dried lavender harvested from my garden. You could also try these Lemon Thyme Shortbread Cookies, these Earl Grey Shortbread Cookies or these Cardamom Orange Zest Shortbread Cookies.

flower-cookies-2Some Tips On Choosing Edible Flowers:

I used a few varieties of pansies that I had growing in my garden but you can experiment with other edible flowers too. Some things to keep in mind…

  • Choose flowers that will fit the shape of the cookie.
  • Only use edible flowers that you can identify correctly
  • Only use edible flowers that are grown organically (pesticide-free).
  • Edible flower suggestions: Chamomile, Johnny-Jump-Ups, Borage, Lavender, Marigolds, Pansies, Rose Petals, Violas, Violets.

flower-cookies-1

Pansy Shortbread Cookies
 
Author:
Recipe type: Dessert
Serves: 36 Cookies
Ingredients
  • 1 cup unsalted butter, softened
  • 2 cups all-purpose flour
  • ½ cup lavender infused sugar
  • ¼ teaspoon salt
  • 1 teaspoon vanilla extract
  • 2 tablespoons dried lavender
  • Zest of one lemon
  • Fresh, organic pansies
  • 1 egg white, beaten
  • Fine sugar (for finishing)
Instructions
  1. Cream the butter with an electric mixer until fluffy. Stir in the flour, sugar and salt; beat on low speed for 1 minute. Crush the dried lavender using a mortar and pestle. Then add the vanilla, lavender and lemon zest to the mixer, beating until just incorporated.
  2. Let the dough chill in the refrigerator for approx. 1 hour. Preheat oven to 325 degrees F. Grease baking sheet and set aside.
  3. On a floured surface, roll out the dough to ¼" thickness. Cut out with round or scalloped cookie cutters and place 1" apart onto the prepared baking sheet. Bake for 14-18 minutes, until the cookies begin to turn light golden around the edges and on the bottom. Remove from oven and transfer to wire racks to cool.
  4. Once the cookies are all baked and cooled its time to decorate with flowers! Use a pastry brush to brush a cookie with egg white and place a pansy on top. Then brush the pansy all over with egg white and sprinkle with fine sugar.
  5. Repeat with remaining cookies and return them to the baking sheet. Bake in the oven for another 5 minutes, then transfer to the wire racks to cool.

 
flower-cookies-3flower-cookies-4

Serve these at your next tea party or package them up as favors at your next fairytale gathering! And don’t forget to leave a few out in your garden for the fairies to enjoy 🙂
flower-cookies-6

May DIY Craft Challenge: Once Upon A Fairytale

Thank you to everyone who participated in last month’s DIY Craft Challenge! We just love seeing the awesome things you all make and feel so inspired by the ‘garden’ themed submissions we received. Be sure to check out our roundup post of what everyone made here!

Once Upon A Fairytale…

This month we are diving into a world of magic and make believe! ‘Fairytales’ is the theme for May and we invite you to find inspiration in your favorite storybook. So channel your inner child (and invite the kids in your life to join in) and enter a world of wonder this month. Have tea with the fairies in your backyard, host your own fairytale theme puppet show, or bake a cake that’s fit for a Queen! Wherever this month’s theme takes you, we hope you’ll share your own handmade magic with us!
1605_diychallenge_logo_wideMay DIY Craft Challenge: Once Upon A Fairytale

Inspiration Sources:

1. Emerald City Fairy House by Florence Griswold Museum
2. Finger Puppets by Lia Griffith
3. Storybook Clock by Amanda Patterson
4. Fairy Tea Set by Twig & Toadstool
5. Felt Mushrooms by Lil Fish Studios
6. Clothes Peg Fairies by The Imagination Tree
7. Fairytale Storytelling Game by Let’s Play Music
8. Paper Plate Dragons by Pink Stripey Socks
9. DIY Woodland Acorn Necklace by Flamingo Toes
10. Doily Hot Air Balloons by Joann’s
11. Sandcastle Place Cards by Oh Happy Day!

HOW TO ENTER

Click here for details on how to enter your project to the DIY Challenge! Don’t forget to share your projects with everyone on Instagram using #diycraftchallenge.

The challenge officially begins today, May 1st and ends on May 29th, 2016. We will post a roundup of everyone’s projects on May 31st. Have fun and happy crafting!

Need more inspiration?

Take a look out our Pinterest board for more stitch inspired project ideas.

APRIL DIY Challenge Roundup

Don’t know what it’s like where you are, but in the Pacific Northwest we’ve had a confusing collection of warm sunny days and cold rainy days. The plants seem to like it, though. It looks like spring!

We’re excited to present this little round-up of Garden inspired projects from you (and people just like you).

1604_diychallenge_logo_wide

claire_DSC0858-sm
Claire made an upcycled window herb planter that has us buzzing.

This craft composed of 2 parts: the first was painting a cheesy pun and some bees onto an old window. The second part was decoupaging some old tin cans with insects to attach to the window and use as a herb planter.

She has provided free templates and instructions to make your own herb window at her blog – Pillar Box Blue.


maura_IMG_4981
Maura, The Messy Brunette, shared these amazing crocheted blooms (and a nest she found in her garden in Ireland).

Weather hasn’t been great here to get out in the garden but I did manage to make some little flowers…


cintia7
Spring has long since passed in Córdoba, Argentina; home of Cintia and Sol de Noche {deco crochet}; but she’s bringing a little of the garden in, in a beautiful way.

As Winter is just around the corner here, I decided to bring some of my plants inside. Your theme has given me the chance to recycle some jute I had and leftover yarn in order to create these crochet pot covers.


tara_IMG_0788

Tara submitted a little of her amazing artsiness  (and legendary lettering) in these swoon-worthy practice pieces.

…just experimenting with gouache and brush lettering. 


donna_signDonna sent in this lovely spring wreath.

I wasn’t planning to make a new wreath for our front door this spring, but as the weather got warmer, I decided I wanted something new.  I had an idea and went to the store to buy some pretty artificial flowers, some ribbon, and a wreath form.

She added a welcome sign to the center, and it turned out wonderfully. You can see more photos on her blog.


becky_image1

Becky Kimberly of Cotswoldcre8 shared these awesome bright fiber flowers.

I’m a self-employed community artist whose been experimenting with gorgeous Marino wool create  to funky 3-D blooms!


I love finishing the roundup with a project that reminds me of the next theme, too! Rachel and I have been hard at work on the May theme, and hope you’ll be happily ever after surprised.